IMG 1010 - Location Override

Description:

When a call is released the RELEASE and RELEASE COMPLETE messages communicate information during the Call Clearing Process. One of the more important pieces of information is the LOCATION field. The location field describes what part of the network was the reason the RELEASE message was issued. The location override can be used to override the location value sent by the IMG in the Cause Indication parameter in the Release (REL) message within an SS7 call.

Accessing this Pane:

Dialogic IMG EMS -> Routing Configuration -> Channel Groups -> Channel Group (SS7) -> ISUP Group -> Location Override

Maximum Objects:

1 per Physical IMG

ClientView Pane:

Field Descriptions:

Location Override:

Select from a drop down menu whether to Override the location value in the Release message.

Ignore (default) - Do not override. Propagate Location and Coding Standard to RELEASE message.

Override - Override the location number with the settings selected below

Location:

If Override is enabled, select from drop down menu one of the following options.

User (default) - Change the Location parameter to 'Message Generated by User'

Local Private Network - Change the Location parameter to 'Message generated by private network serving the local user'

Local Public Network - Change the Location parameter to 'Message generated by public network serving the local user'

Transit network - Change the Location parameter to 'Message generated by transit network.'

Remote public network - Change the Location parameter to 'Message generated by public network serving the remote user'

Remote private network - Change the Location parameter to 'Message generated by private network serving the remote user.'

International network - Change the Location parameter to 'Message generated by international network.'

Network Beyond Interworking Point - Change the Location parameter to 'Message generated by network beyond inter-working point.'

Coding Standard:

If Override is selected in Location Override field then this

CCITT (ITU-T) - Change the Coding Standard to CCITT in the Release (REL) message.

ISO/IEC Standard - Change the Coding Standard to ISO/IEC in the Release (REL) message.

National standard - Change the Coding Standard to National Standard in the Release (REL) message.

Standard for Network side of interface - Change the Coding Standard to Standard for Network Side of Interface in the Release (REL) message.