Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

IMG 1010 - SS7 Features

Below is a list of ISUP variants the IMG supports.

  • ANSI 97

  • ITU 97

  • ETSI V1

  • China

  • ANSI 95

  • ITU 93

  • ETSI V2

  • JT-ISUP

  • ANSI 92

  • CCITT 88

  • ETSI V3

  • Custom Variants

 

Misc

  • IMG 1010 - FCI Override - Forward Call Indicators contain information relating to the characteristics of the connection, signaling path and called party sent in the forward direction. This is a mandatory parameter in IAM messages, which is used in countries that offer CUG (closed user group) service. Using the IMG 1010 - FCI Override pane, you can configure the IMG to send or ignore various indicators. See IMG 1010 - Configuring SS7 CIC Routing

  • IMG 1010 - BCI Override

  • IMG 1010 - Location Override

  • Circuit Query Message - The Circuit Query Message (CQM) can be sent to a CIC or a group of CICs using the IMG 1010 - Circuit Group pane. The CIC status will update accordingly if there has been any change.

  • COT Test

  • IMG 1010 - Pre-Post 95 Support for GRS-GRA

  • Suppress UCICs - This feature allows you control the sending of UCIC. By default, UCIC is sent for National calls, and is suppressed for International calls, based on the Network Indicator setting of the SS7 Stack. You can change these setting if required in the IMG 1010 - SS7 Stack Pane.

  • Control CICs on up to 32 IMG's

  • Gain Control on SS7 Channel Groups
     

Interworking

  • No labels

Return to Documentation Home I Return to Sangoma Support