Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

IMG 1010 - Configure IP Bearer Profiles and Vocoder Entries

Overview:

Before creating the Channel Groups the IP bearer profiles must be created. The IP Bearer profiles will be used in the Channel Group objects incoming and Outgoing IP profiles.

 

Procedure:

  • Right Click on the Dialogic IMG EMS object and select New Profiles. A Profiles object will get created. This will hold multiple IP Bearer profiles and there corresponding Vocoder entries. No data needs to be entered in this pane.

  • Right Click on Profiles and select New IP Bearer Profiles. The IP bearer profiles screen appears. For information on what data to enter here see IMG 1010 - IP Bearer Profile.

  • Once the IP bearer entry is completed right click on Bearer IP Profile object and select New Supported Vocoders. For information on what data to enter here see IMG 1010 - Vocoder Entry.

  • Configuring the IP Bearer Profiles Object in ClientView has been accomplished. The next step is to configure the Channel Groups.

 

  • No labels