Bearer Capability Override

The Bearer Capabilities are part of the Q.931 SETUP messages and define the characteristics of a call. The Bearer Capability parameter used by the calling party specifies the b channel that is being requested. The Bearer Capabilities Override pane will configure the IMG 2020 to either pass-through (ignore) the bearer capability or modify it to a pre-selected parameter from drop down menu.

Web GUI Page

Dialogic > IMG 2020 > Signaling > ISDN > ISDN D Channel > ISDN Group > New Bearer Capability Override

Maximum Objects

1 Bearer Capabilities Override object per ISDN BDN Group

Related Topics and Dependencies

ISDN Group 

Field Descriptions

Coding Standard

Ignore (default) - Propagate the Coding Standard to the Outbound SETUP message.

CCITT (ITU-T) - Change the Coding Standard to CCITT in the Outbound SETUP message.

ISO/IEC Standard - Change the Coding Standard to ISO/IEC in the Outbound SETUP message.

National standard - Change the Coding Standard to National Standard in the Outbound SETUP message.

Standard for Network side of interface - Change the Coding Standard to Standard for Network Side of Interface in the Outbound SETUP message.

Information Transfer Capability

Ignore (default) - Propagate the Informational Transfer Capability to the Outbound SETUP message.

Speech - Change the Information Transfer Capability to Speech in the Outbound SETUP Message

Unrestricted Digital Info - Change the Information Transfer Capability to Unrestricted Digital Info in the Outbound SETUP Message

Restricted Digital Info - Change the Information Transfer Capability to Restricted Digital Info in the Outbound SETUP Message

3.1 kHz audio - Change the Information Transfer Capability to 3.1 KHz audio in the Outbound SETUP Message

7 khz - Change the Information Transfer Capability to 7 KHz audio in the Outbound SETUP Message

Video - Change the Information Transfer Capability to Video in the Outbound SETUP Message

Transfer Mode

Ignore (default)- Propagate the Transfer Mode to the Outbound SETUP message

Circuit Mode - Change the Transfer Mode in the Outbound Setup message to Circuit Mode

Packet Mode - Change the Transfer Mode in the Outbound Setup message to Packet Mode

User Information layer 1 protocol

Ignore (default) - Propagate layer 1 protocol to the Outbound SETUP Message

G.711 u-law - Change the layer 1 protocol to G.711 u-law in the Outbound SETUP Message

G.711 A-law - Change the layer 1 protocol to G.711 A-law

G.721 - Change the layer 1 protocol to G.721 in the Outbound SETUP Message

H.221 and 242 - Change the layer 1 protocol to H.221 and H.242 in the Outbound SETUP Message

H.223 and 245 - Change the layer 1 protocol to H.223 and H.245 in the Outbound SETUP Message