Translation Table
The IMG 2020 supports translating incoming and outgoing digit strings such as the Dialed Number, Originating Number, or Generic Number. The Translation Table object is created to translate either incoming or outgoing digit strings. The Translation Table is created under either the Incoming Translation Table or Outgoing Translation Table objects dependent on where the translation is going to take place. Once the Translation Table object is created, a total of 200 translation entries can be created under it. See information below.
Web GUI Page
The translation table object can be created under the Incoming Translation Table or Outgoing Translation Table objects.
Dialogic > Routing Configuration >Incoming Translation Tables > New Translation Table
-or-
Dialogic > Routing Configuration > Outgoing Translation Tables > New Translation Table
Maximum Objects
IMG 2020 supports a maximum of 20 Translation Tables. The sum of incoming translation tables and outgoing translation tables must not exceed a total of 20.
Related Topics and Dependencies
The Translation Table object is created under either the Incoming or Outgoing Translation Table objects. Once the translation table is created, multiple Translation Table Entries can be created. Once the Translation Table and the Translation Table Entries have been configured, the translation tables created can be selected from a drop down menu in the Incoming and Outgoing Translation Table fields within the Channel Group object. Any calls coming into a channel group on the IMG 2020 can be translated on either the incoming or outgoing side of that channel group.
Configuring Digit Matching and Translation
Field Descriptions
Name
This field defaults to Translation_Table_<x> where "x" is a numeral variable. The default name can be accepted or, a different name can be added by deleting the current name and entering a different name. When renaming, it is good practice to enter a name that identifies or describes this particular translation table.
Buttons
Download Translation Table
A Translation Table and its entries will not get sent to the IMG 2020 until the Download Translation Table button is clicked on. Simply committing an object does not download the translation table. After configuring and committing the translation table and entries, click on the Download Translation Table button. This will send and update the translation table stored on the IMG 2020. If the Translation Tables icon has changed to the icon displayed below, the configured or updated translation tables have not been sent to the IMG 2020. Click on the Download Translation Table button and the tables will download. The icon will switch back to normal once the tables have downloaded.
 |
Translation Table has not been sent to IMG 2020. |
Delete All Translation Elements
The Delete All Translation Elements button can be used to clean up a configuration. The Delete All Translation Elements button will delete all the Translation Table Elements configured under the Route Table that are not being utilized someplace else.