IMG 1010 - RADIUS - Dialogic VSA's

23

 Dialogic-voip-dst-sig-ip-in

Inbound IP address of the remote gateway.

24

 Dialogic-h323-conf-id

Unique call identifier generated by the gateway. Used to identify the separate billable events (calls) within a single calling session.

25

 Dialogic-Setup-Time

Setup time in NTP format.

26

 Dialogic-Call-Origin

Gateway's behavior in relation to the connection that is active for this leg.

27

 Dialogic-Call-Type

Protocol type or family used on this leg of the call. For example, answer on a leg 1; originate on a leg 2; callback on leg 1.

28

 Dialogic-connect-time

Connect time in Network Time Protocol (NTP) format.

29

 Dialogic-disconnect-time

Disconnect time in NTP format.

30

 Dialogic-Q931-disconnect-cause

Q.931 disconnect cause code retrieved from CCAPI. The source of the code is the disconnect location such as a PSTN, terminating gateway, or SIP.

33

 Dialogic-h323-gw-id

Domain name server (DNS) name or local name of the voice gateway that is sending the VSA.

35

 Dialogic-h323-incoming-conf-id

Unique number for identifying a calling session on a gateway, where a session is closed when the calling party hangs up.

36

 Dialogic-voip-dst-rtp-ip-in

Inbound Remote VoIP gateway IP address.

37

 Dialogic-media-dst-rtp-ip

Remote media gateway IP address.

38

 Dialogic-release-source

If a call was released by the calling party, called party, or an internal or external source.

39

 Dialogic-dnis-pre-translate

Incoming Dialed Number Identification Service.

40

 Dialogic-ani-pre-translate

Incoming Automatic Number Identification.

41

 Dialogic-dnis-post-translate

Called number to be sent out of the IMG 2020.

42

 Dialogic-ani-post-translate

Calling number to be sent out of the IMG 2020.

43

 Dialogic-call-direction

The direction of the call.

44

 Dialogic-trunk-grp-in

The trunk group name from where the incoming call has come.

45

 Dialogic-trunk-grp-out

The trunk group name to which the outgoing call is routed.

46

 Dialogic-voip-src-rtp-ip-in

Inbound Source VoIP RTP IP address.

47

 Dialogic-lost-packets

Number of lost voice packets during the call.

48

 Dialogic-voip-src-sig-ip-in

Outbound IP address of the source gateway.

49

 Dialogic-voip-dst-sig-ip-out

Outbound IP address of the remote gateway.

50

 Dialogic-voip-dst-rtp-ip-out

Outbound Remote VoIP gateway IP address.

51

 Dialogic-voip-src-rtp-ip-out

Outbound Source VoIP RTP IP address.

52

 Dialogic-voip-src-sig-ip-out

Inbound IP address of the source gateway.

53

 Dialogic-trans-cause-code

Translated Cause Code when translate cause table is used.

54

 Dialogic-voip-src-rtp-fqdn

VoIP Module FQDN.

55

 Dialogic-voip-src-sig-fqdn

SIP Signaling FQDN.

56

 Dialogic-voip-dst-rtp-fqdn

Remote RTP FQDN.

57

 Dialogic-voip-local-vocoders

Vocoder Information configured for SIP on local IMG 2020.

58

 Dialogic-voip-remote-vocoders

Vocoder Information configured for SIP on remote IMG 2020.

59

 Dialogic-voip-codec-priority

The Priority of which codec will be used first, second....last.

60

Dialogic-sip-referred-by

61

Dialogic-sip-refer-to

62

Dialogic-call-xfer-start-time

63

Dialogic-call-xfer-connect-time

64

Dialogic-sip-redirect-contact

65

 Dialogic-sip-top-diversion

Adds the string/username value of incoming SIP diversion header to Radius VSA. Refer to the RADIUS - Diversion Info in CDR topic for more information.

66

 Dialogic -sip-bottom-diversion

Adds the string/username value of incoming SIP diversion header to Radius VSA. Refer to the RADIUS - Diversion Info in CDR topic for more information.

67

 Dialogic -original-called-number

Adds the original called value of incoming ISDN or SS7 call to Radius VSA. See Diversion Support in Radius Topic for more information.

68

 Dialogic -redirecting-number

Adds the redirecting number of incoming ISDN or SS7 call to Radius VSA. See Diversion Support in Radius Topic for more information.

102

 Dialogic-credit-time

Number of seconds for which the call is authorized.

103

Dialogic-h323-return-code

105

 Dialogic-timestamp

Time of day at the dialed number or at the remote gateway.

106

 Dialogic-redirect-number

Phone number to which the call is redirected (toll-free or customer service number).

141

 Dialogic-call-id

Value of the Call-ID header.

144

 Dialogic-prev-hop-via

Sent-by portion of topmost via when the request arrived at the proxy.

145

 Dialogic-prev-hop-ip

Previous hop IP address, as seen by the proxy. What would normally be placed in the received parameter when the proxy detected that the sender does not agree with the top-most via.

146

 Dialogic-incoming-req-uri

For inbound Radius message. Both Start & Stop. Access to the value after the RFS on the inbound side.

147

 Dialogic-outgoing-req-uri

For outbound Radius messages. Both Start & Stop Access to the value after outseize of the Invite.

148

 Dialogic-next-hop-ip

Next-hop IP address where the request is forwarded.

149

 Dialogic-next-hop-dn

The Domain Name (DN) or Fully Qualified Domain Name (FQDN) where the request is forwarded.

150

 Dialogic-sip-resp-code

SIP Cause Code before translation to the Q931 value.

151

 Dialogic-sip-attempt-info

In case the IMG 2020 tries the contacts returned with 3xx, the IMG 2020 will log to the CDR each attempt.

152

 Dialogic-Called-Number-NOA

Carries the Nature of Address of the Called Party Number that is present in the incoming call. If the Called Party NOA parameter is changed due to translations, the Called Party Number sent to the RADIUS Server is the initial Called Party Number coming from the incoming call.

153

 Dialogic-Calling-Number-NOA

Carries the Nature of Address of the Calling Party Number that is present in the incoming call. If the Calling Party NOA parameter is changed due to translations, the Called Party Number sent to the RADIUS Server is the initial Called Party Number coming from the incoming call.

154

 Dialogic-span-id

Carries in the Accounting Start and Stop messaging the span id present in the incoming and outgoing call. For example, if a call utilizes span 28 on either the A or B leg of a call, the Dialogic-span-id is displayed in the RADIUS messaging as Dialogic-span-id = "28".

155

 Dialogic-channel-id

Carries in the Accounting Start and Stop messaging the channel id present in the incoming and outgoing call. For example, if a call utilizes channel 02 on either the A or B leg of a call, the Dialogic-channel-id is displayed in the RADIUS messaging as Dialogic-channel-id = "2".