IMG 1010 - RADIUS - Termination-Action

Radius Attribute: Termination-Action

As per RFC2865:

This Attribute indicates what action the NAS should take when the specified service is completed. It is only used in Access-Accept packets.

A summary of the Termination-Action Attribute format is shown below. The fields are transmitted from left to right.

Open

Type (IETF Attribute Number) - 29 for Termination-Action.

Length - 6

Value - The Value field is four octets.

If the Value is set to RADIUS-Request, upon termination of the specified service the NAS MAY send a new Access-Request to the RADIUS server, including the State attribute if any.