IMG 1010 - Configuring H.323 Routing

Creating an H.323 Channel Group

  • Right-click Routing Configuration and select New Channel Groups. Skip this step if an H.323 Channel Group has already been created.

  • Right-click Channel Groups and select New Channel Group. The Channel Group pane appears.

  • Enter the Name and ID of this channel group.

  • In the Channel Group Function field, select Incoming Trunks, Outgoing Trunks or Incoming/Outgoing Trunks.

  • In the Signaling Type field, select H.323.

  • Select an Incoming IP Profile and an Outgoing IP Profile for this channel group.

  • Select other fields as required. See the IMG 1010 - Channel Group GUI Reference for detailed field descriptions.

Do not select a Route Table in the Route Table field at this point. The route table must first be created. Once the route table is configured then it will be added to the Channel Group Pane. At that point you can add it to your H.323 Channel Group Pane. (See IMG 1010 - Creating a Route Table)

 

Assigning a Channel Group to an IP Network Element

Once the Channel group is created, it can be assigned to a specific H.323 endpoint. Calls routed to or from this endpoint will use the incoming or outgoing configuration defined by the Channel Group.

  • Right-click the H.323 Channel Group and select New IP Network Element. The IMG 1010 - IP Network Element pane appears.

  • From the H.323 Network Element field, select the desired endpoint from the drop-down list, which is populated with all configured IMGs, external gateways, and external gatekeepers. See IMG 1010 - IP Network Element for more information.

Return to Documentation Home I Return to Sangoma Support