You will first need to have made a purchase for the FPBX to PBXact conversion for your FreePBX Appliance system from the Sangoma Portal or a Authorized Sangoma Distributor or Partner.
Once this purchase has been made and confirmation the order was processed you can proceed to the steps below
The conversion process requires your FreePBX Appliance to be on version 10.13.66-18 or newer or errors and failures will happen.
Review this wiki to verify your current version and update if need be before proceeding below. FreePBX-Distro-10.13.66
SSH to your PBX and login with the root user and update the license file with the command below.
fwconsole sa u |
|
The update process will install additional RPMs, and make the necessary changes to the GUI behind the scenes. The end result is a complete new PBXact system. This process takes about 3-4 minutes.
When completed you can run the following End of Line testing and all checks should come back Passed. If you have any failed checks wait 5 minutes and run again. If you still have failed checks please open a support ticket here.
fwconsole sa eol
