To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
.jpg?version=2&modificationDate=1705950933751&cacheVersion=1&api=v2&width=616 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-18 (1).jpg")
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
.jpg?version=1&modificationDate=1702065408134&cacheVersion=1&api=v2&width=576 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-18 (2).jpg")
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
.jpg?version=1&modificationDate=1702065514513&cacheVersion=1&api=v2&width=655 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-16 (1).jpg")
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
.jpg?version=1&modificationDate=1702065580345&cacheVersion=1&api=v2&width=582 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-18 (3).jpg")
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the Test/Reset switch while the unit beeps after one second and all indicator lights on the front of the unit come on.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
.jpg?version=1&modificationDate=1702065751679&cacheVersion=1&api=v2&width=579 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-16 (2).jpg")
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.
To find this IP Address download CyberData’s VoIP Discovery Utility program, which allows you to easily find and configure the default web address of the CyberData VoIP products. CyberData’s VoIP Discovery Utility program is available at the following website address. http://www.cyberdata.net/support/voip/discovery_utility.html
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, you should see the MAC Address under “Current Settings.”
Log in to the Web GUI of the device by putting the IP Address of the device into your browser. Log in to the device when prompted. The factory default username is "admin" and the password is also "admin."
Once logged in, click on the “Autoprovisioning” option on the left side of the screen.
Fill in the following information:
Enable Autoprovisioning - Check the box
Get Autoprovisioning from DHCP - Check the box
Autoprovisioning Server (IP Address) - Define the IP Address of your PBX in our example this is 10.10.0.1
.jpg?version=1&modificationDate=1702065793335&cacheVersion=1&api=v2&width=760 "PBX GUI > PBX GUI - Supported Devices-CyberData > Cyberdata-18 (4).jpg")
Don’t forget to press "Save" and then the "Reboot" button at the bottom of the page when done.
Press and hold the RTFM switch until the LED button starts blinking rapidly (about 10 seconds), then release the RTFM switch.
Continue to press the switch until after the indicator lights go off, and then release it. The settings for this device are now restored to the factory defaults.