Released March 2013

Feature Enhancements

• Global

  • Display Name Option- Prior to this release we hard coded the Display name on each phone to be the Extension Name.  We now let you pick on a per template basis if the Display name is the Extension Number or the Extension Name as defined in each extension in FreePBX.

  • Multi Line Keys- Allow setting up different extensions to different line buttons on a phone.  For example lines 1 and 2 might be extension 301 but line 3 is extension 101
     

• Aastra

  • Button Options-  Add the following button options for Aastra phones.  

    • Conf

    • Transfer

    • flash

    • spre

    • park

    • DND

  • MultiCast List- Add ability to define what MultiCast addresses the phone should listen for.

  • New Firmware Pack 1.0.2- Add firmware pack 1.0.2 which consist of

    • 480i 1.4.3.1001
      51i 2.6.0.2019
      53i 3.2.2.2112
      55i 3.2.2.2112
      57i 3.2.2.2112
      57iCT 3.2.2.2112
      6731i 3.2.2.2112
      6735i 3.2.2.6274
      6737i 3.2.2.6274
      6739i 3.2.2.2112
      9112i 1.4.3.1001
      9133i 1.4.3.1001
      9143i 3.2.2.2112
      9480i 3.2.2.2112
      9480iCT 3.2.2.2112

• Algo

  • MultiCast List- Add ability to define what MultiCast addresses the device should listen for.
     

• Cisco/SPA

  • Phone User Login- Ability to disable the User Account for a Cisco/SPA phone and rely only on the admin login instead of a user and admin level on a per template basis

  • Audio Indication for Call Pickup- Ability to turn on or off the Audio Indication for Call Pickup on a per template basis

  • Define Softkey Buttons- Add ability in basefile edits to change or define all the different soft keys of the phone depending on the state of the phone such as;

    • Conferencing_Key_List

    • Connected_Key_List

    • Dialing_Input_Key_List

    • Hold_Key_List

    • Idle_Key_List

    • Missed_Call_Key_List

    • Off_Hook_Key_List

    • Progressing_Key_List

    • Releasing_Key_List

    • Ringing_Key_List

    • Shared_Active_Key_List

    • Shared_Held_Key_List

    • Start-Conf_Key_List

    • Start-Xfer_Key_List
       

• CyberData

  • MultiCast List - Add ability to define what MultiCast addresses the phone should listen for.

• Greandstream

  • Enable MPK sending DTMF- This is now defaulted to yes
    

  • Line Button Programming - Allow line buttons to be programmed as anything such as speed dial or BLF not just a line.  (Please note at this time Grandstream does not allow us to set the label so the label on the button even if set in EPM will be blank on the phone)
     

• Snom

  • Button Options- Add the following button options for Snom phones.  

    • Park+Orbit

    • DTMF

    • Multicast

  • MultiCast List- Add ability to define what MultiCast addresses the phone should listen for.
     

• Xorcom

  • Button Options- Add the following button options for Snom phones.  

    • Park

    • DTMF

    • Multicast

  • MultiCast List- Add ability to define what MultiCast addresses the phone should listen for.

• Yealink

  • Button Options-  Add the following button options for Yealink phones.  Call Park, DTMF Force, Multicast Paging

  • MultiCast List- Add ability to define what MultiCast addresses the phone should listen for.
     

Bug Fixes

• 2.10.0.108.7

  • Fix issue where Polycom legacy models ignored basefile changes.
     

• 2.10.0.108.6

  • Fix issue where some phones like SNOM were not displaying the extension name or number on the line button if the line button was on a LCD phone

  • If using SpeedDial option for Panasonic phones on a programable key it would cause the config file to not load in the phone

  • Bug in Cisco FXO Gateways we were not setting the path for the firmware so it would never update the firmware from the server.