This feature is only available in the PRO version of System Admin. |
On this page you can set your FTP, TFTP and HTTP Provisioning Server information.
Logging in
On the top menu click Admin
In the drop down click System Admin
In the right side navigation menu click FTP Server
Choose FTP Server: Enabled
Enter a Username that FTP clients will use for authentication
Enter a Password that FTP clients will use for authentication
Click Update
The authentication string for FTP needs the format username:password@server.com for the phones to be able to retrieve their configuration files.
0e351a4e:d07ef38ad0e35982@server.example.com |
Choose FTP Server: Disabled
Click Update
Choose Enable TFTP Server
Click Update
Choose TFTP Server: Disabled
Click Update
HTTP and HTTPS Authentication requires that endpoints must authenticate themselves to the server before receiving their configuration. This is normally done by configuring your DHCP Option 66 parameter to include a complete URL. Using the example below, assuming that the machine was listening on port 4443 for HTTPS Provisioning requests, the URL would be:
https://0e351a4e:d07ef38ad0e35982@server.example.com:4443 |
Port NUMBERS are configured in Port Management
As the username and password will be broadcast to any device that is physically connected to your local network, it is advised to use the random username and password that is generated. If you delete the string, a new one will be automatically generated for you.