IMG 1010 - Items Required for Installation

Item

Description/Format

Sangoma Supplied Server Specifications

 GCEMS Server

GCS 900 GCEMS ServerGCS 1900 GCEMS Server

IMG-GCS-0900R - (Linux software installed)

IMG-GCS-0901R - (Linux software not installed)

IMG-GCS-1900R - (Linux software installed)

IMG-GCS-1901R - (Linux software not installed) 

Note: Third party servers must meet minimum requirements for use with a single IMG 1010 configuration. See IMG 1010 - GCS 3010 Server Configuration Details for more information on these requirements. 

 Hardware

Rail Kit 

Static rail kit is included.

 System Software

img1010_ver1053xxx_id0101.bin

xxx = build number 

Factory-Installed on GCEMS Server -and- supplied on CD included with shipment.

 GCEMS Software 

IMG_10.5.3.xxx.binIMGUserInterface_10.5.3.xxx.bin 

xxx = build number 

Factory-Installed on GCEMS Server -and- supplied on CD included with shipment.

 Remote Monitoring

VNC Monitor Software

The VNC Server is Factory-Installed on GCEMS Server.

A VNC Client is available from http://RealVNC.com . 

 Install Scripts 

xldhcp- creates dhcpd.conf file.

xlntp- creates ntp.conf file.

lnimg (link img) - creates software link to load software. 

Factory-Installed on GCEMS Server into the /opt/dialogic/common/osconfig directory.

 Operating System

Red Hat Linux 5.5 ES 32 and 64-bit Tikanga, Kernel 2.6.18 

Also Supported:

Red Hat Linux 3.0 ES, (Kernel 2.4)

Red Hat Linux 4.0 ES, Nahant Update 6.0 (Kernel 2.6)

Red Hat Linux 5.0 ES, Tikanga Update 1.0 (Kernel 2.6)

Red Hat Linux 5.4 ES 64-bit, Tikanga (Kernel 2.6.18)

Red Hat Linux 6.7 ES 64-bit, Santiago (Kernel 2.6.32) 

Factory-Installed:

GCS 900R: = Can control up to 4 IMG nodes. 

GCS 1900R = Can control 4 nodes and above. 

Note: Red Hat Enterprise Linux 5 is installed on the servers above. It is up to the customer to register their copy of Red Hat in order to get updates, etc.

 IMG License

10301234_20091030195936

<chassis serial number>_<timestamp>.cfg 

Sent separately by your supplier.