Dialogic IMG - IMG 1010 - Redundant Data

The following illustration shows the cabling for redundant DATA.

Open

• The DATA0 and DATA1 ports are used for communication between the IMG 1010 and the IP network.

• Ethernet Ports DATA0 and DATA1 are used for RTP streams.

• Ethernet Ports DATA0 and DATA1 can also be used for SIP or H323 signaling.

• VOIP Module 0 and Module 1 send RTP to and from the Ethernet DATA Ports within the IMG 1010

• An IP address shared by DATA0 and DATA1 for redundancy is configured in ClientView.