Effective September 30, 2026, these products will reach End of Sale and therefore will no longer be available for purchase. Effective September 2028, these products will reach End of Life. After this date, regular updates, maintenance, and technical support will be discontinued in accordance with our product lifecycle policy. For a complete list of the affected SKUs, click HERE. |
|---|
Dialogic IMG - IMG 1004 - I/O Cable Specifications
Table of Contents
CAUTION: Sangoma recommends that you configure any routers or switches connected to the IMG 1004 for 100Mbit and Auto-negotiation. Disabling auto-negotiation may result in packet loss. Also, broadcast propagation between ports must be enabled to allow BootP.
Overview
The IMG 1004 can be interconnected in a single platform configuration or in a redundant platform configuration.
10/100BaseT Ethernet Cable Specifications
The IMG 1004 communicates with the host and other units in the network through Ethernet connections over:
10BaseT
100BaseT
The table below lists the cable specifications.
Characteristics | 10/100Base-T (Shielded) Category 5 |
|---|---|
Designator | Twisted pair |
Segment Length - Recommended maximum | 100 meters (328 ft) |
Cable Type | 100-Ohm shielded twisted pair |
Connector | 8-pin RJ-45 |
T1/E1 Span/Timing Cable Specifications
The tables below list the cable specifications.
Characteristics | T1 (Shielded) Category 8 |
|---|---|
Designator | Twisted pair |
Segment Length - Recommended maximum | 100 meters (328 ft) |
Cable Type | 100-Ohm shielded twisted pair |
Connector | 8-pin RJ-48 |
Characteristics | E1 (Shielded) Category 8 |
|---|---|
Designator | Twisted pair |
Segment Length - Recommended maximum | 100 meters (328 ft) |
Cable Type | 120-Ohm shielded twisted pair |
Connector | 8-pin RJ-48 |