Dialogic IMG - IMG 1010 - RADIUS - CDR Example - Dialogic-span-id and Dialogic-channel-id

1 Incoming SIP
- 1.1 Call uses span 5504, chan 0
2 RADIUS CDR Incoming leg
3 Outgoing SS7
- 3.1 Call uses Span 28, Channel 2
- 3.2 RADIUS CDR Outgoing leg
- 3.3 Additional Information

The example below displays a portion of a call trace displaying the incoming and outgoing leg of a SIP to SS7 call. Also displayed is the RADIUS CDR records sent for this call. The call trace and CDR's displayed below show the relationship between the span/channel being utilized and the values being sent in the Dialogic-span-id and Dialogic-channel-id of the RADIUS CDR's.

Incoming SIP

Call uses span 5504, chan 0

06:56:54.646 CALL(SIP) (22:00001:00) SENT Route Control to L4
06:56:54.646 CALL(L4) (22:00001:00) RCVD Route Control from SIP
06:56:54.646 CALL(L4) (22:00001:00) Accessing Route Table 2
06:56:54.646 CALL(L4) (22:00001:00) Accessing Resource Table 149
06:56:54.646 CALL(L4) (22:00001:00) Hunting Algorithm is Round Robin
06:56:54.646 CALL(L4) (22:00001:00) SENT Route Control Ack to SIP
06:56:54.646 CALL(SIP) (22:00001:00) RCVD Route Control Ack from L4
06:56:54.646 CALL(SIP) (22:00001:00) Session Group Profile ID is 0
06:56:54.646 CALL(SIP) (22:00001:00) SENT Route Control to L4
06:56:54.646 CALL(L4) (22:00001:00) RCVD Route Control from SIP
06:56:54.646 CALL(L4) (22:00001:00) Accessing IP Bearer Profiles
06:56:54.646 CALL(L4) (22:00001:00) Profile Id 1 (RG 769)
06:56:54.646 CALL(L4) (22:00001:00) SENT Route Control Ack to SIP
06:56:54.646 CALL(SIP) (22:00001:00) RCVD Route Control Ack from L4
06:56:54.646 CALL(SIP) (22:00001:00) m line (audio) codec list: 0
06:56:54.646 CALL(SIP) (22:00001:00) RTP Type: 0, name: PCMU, clk: 8000
06:56:54.646 CALL(SIP) (22:00001:00) CODEC Negotiation Priority LOCAL
06:56:54.646 CALL(SIP) (22:00001:00) CPC (Default)
06:56:54.646 CALL(SIP) (22:00001:00) Leg 0 associated with hndl(4999), LTS(1024)(span 5504 chan 0)
06:56:54.646 CALL(SIP) (22:00001:00) SENT Setup to L4
06:56:54.646 CALL(L4) (22:00001:00) RCVD Setup Ind from SIP
06:56:54.646 CALL(L4) (22:00001:00) SENT RFS to GCL
06:56:54.656 CALL(GCL) (22:00001:00) RCVD RFS DN=[5088628562] ANI=[5088623613] GN=[] from L4
06:56:54.656 CALL(GCL) (22:00001:00) DN NOA=[3]
06:56:54.656 CALL(GCL) (22:00001:00) ANI APRI=[0],SI=[0],Category=[10]
06:56:54.656 CALL(GCL) (22:00001:00) Incoming Channel Group = 15 [SIP]
06:56:54.656 CALL(GCL) (22:00001:00) SENT RADIUS AUTH REQUEST to RADIUS
06:56:54.656 CALL(L4) (22:00001:00) RCVD RFS response from GCL
06:56:54.656 CALL(GCL) (22:00001:00) RCVD AUTH ACCEPT ACK from RADIUS
06:56:54.656 CALL(GCL) (22:00001:00) SENT RADIUS ACCT START to RADIUS
06:56:54.666 CALL(GCL) (22:00001:00) RCVD ACCT START ACK from RADIUS

RADIUS CDR Incoming leg

Thu Aug 9 02:56:54 2012
User-Name = "auto"
NAS-IP-Address = 10.129.47.165
NAS-Port = 1813
Calling-Station-Id = "5088623613"
Called-Station-Id = "5088628562"
Acct-Session-Id = "00201c040411009900c410235f36be680000"
Acct-Status-Type = Start
NAS-Port-Type = Ethernet
Service-Type = Login-User
Dialogic-call-origin = "originate"
Dialogic-call-type = "SIP"
Acct-Delay-Time = 0
Login-IP-Host = 10.129.47.133
Tunnel-Client-Endpoint:0 = "10.129.47.165"
Dialogic-setup-time = "THU AUG 09 06:56:54:656 2012"
Dialogic-voip-dst-sig-ip-in = "10.129.47.146"
Dialogic-voip-dst-rtp-ip-in = "10.129.47.146"
Dialogic-dnis-pre-translate = "5088628562"
Dialogic-ani-pre-translate = "5088623613"
Dialogic-call-direction = "INCOMING LEG"
Dialogic-trunk-grp-in = "SIP"
Dialogic-voip-src-rtp-ip-in = "10.129.47.166"
Dialogic-voip-src-sig-ip-in = "10.129.47.165"
Dialogic-call-id = "14551@10.129.47.146"
Dialogic-prev-hop-ip = "10.129.47.146:5060/UDP"
Dialogic-prev-hop-via = "sip:10.129.47.146:5060"
Dialogic-incoming-req-uri = "sip:5088628562@10.129.47.165"
Dialogic-voip-local-vocoders = "PCMU"
Dialogic-voip-remote-vocoders = "PCMU"
Dialogic-voip-codec-priority = "Local"
Dialogic-span-id = "5504"
Dialogic-channel-id = "0"
Client-IP-Address = 10.129.47.165
Acct-Unique-Session-Id = "bab31bc9103acd20"
Timestamp = 1344495414

Outgoing SS7

Call uses Span 28, Channel 2

06:56:54.666 CALL(GCL) (22:00001:00) SENT Make Call Request to GCL
06:56:54.666 CALL(GCL) (22:00001:01) SENT Route Control to L4
06:56:54.666 CALL(L4) (22:00001:00) RCVD Route Control from GCL
06:56:54.666 CALL(L4) (22:00001:00) Accessing Route Table 5
06:56:54.666 CALL(GCL) (22:00001:01) RCVD Route Control Ack (Mid Stream Router)from L4
06:56:54.666 CALL(GCL) (22:00001:01) Outgoing Channel Group = 0 [SS71]
06:56:54.666 CALL(GCL) (22:00001:01) SENT Route Control to L4
06:56:54.666 CALL(L4) (22:00001:01) RCVD Route Control from GCL
06:56:54.666 CALL(L4) (22:00001:01) Accessing Resource Table 149
06:56:54.666 CALL(L4) (22:00001:01) Resource Group ID is 32
06:56:54.666 CALL(L4) (22:00001:01) Hunting Algorithm is ROUND_ROBIN_CLOCKWISE
06:56:54.666 CALL(L4) (22:00001:01) RCVD Ported Number 2
06:56:54.666 CALL(L4) (22:00001:01) IW: Override TMR (03)
06:56:54.666 CALL(L4) (22:00001:01) IW: Override BC/USI
06:56:54.666 CALL(L4) (22:00001:01) SENT Outseize Ctrl to SS7
06:56:54.666 CALL(GCL) (22:00001:01) RCVD CPE of ADDRESS INFO from L4
06:56:54.666 CALL(GCL) (22:00001:01) Leg 1 associated with LTS(2)(span 28 chan 2)
06:56:54.666 CALL(SS7) (22:00001:01) RCVD Outseize Ctrl (0x2:0x3:0) from L4
06:56:54.666 CALL(SS7) (22:00001:01)

RADIUS CDR Outgoing leg

Thu Aug 9 02:56:56 2012
User-Name = "auto"
NAS-IP-Address = 10.129.47.165
NAS-Port = 1813
Calling-Station-Id = "5088623613"
Called-Station-Id = "5088628562"
Acct-Session-Id = "00201c040411009900c410235f36be680000"
Acct-Status-Type = Start
NAS-Port-Type = Ethernet
Service-Type = Login-User
Dialogic-call-origin = "answer"
Dialogic-call-type = "SS7"
Acct-Delay-Time = 0
Login-IP-Host = 10.129.47.133
Tunnel-Client-Endpoint:0 = "10.129.47.165"
Dialogic-setup-time = "THU AUG 09 06:56:54:726 2012"
Dialogic-connect-time = "THU AUG 09 06:56:56:266 2012"
Dialogic-dnis-post-translate = "5088628562"
Dialogic-ani-post-translate = "5088623613"
Dialogic-call-direction = "OUTGOING LEG"
Dialogic-trunk-grp-out = "SS71"
Dialogic-span-id = "28"
Dialogic-channel-id = "2"
Client-IP-Address = 10.129.47.165
Acct-Unique-Session-Id = "bab31bc9103acd20"
Timestamp = 1344495416

Additional Information

The VSA Data displayed in the CDR is defined as a decimal number displayed in the CDR using an ASCII string format.
The Dialogic-span-id and Dialogic-channel-id are logged in the SIP, H.323, SS7, and ISDN protocols.
The Dialogic-span-id and Dialogic-channel-id are logged on both the A and B leg of a call.
A new dialogic.dictionary file is required for the new VSA's to function. If using Free Radius as described in the topic, load the file into the /usr/share/freeradius directory.