IMG 1010 - RADIUS - Call Trace - Pre-paid Routing

The following call trace shows the IMG using the trunk group indicated by the RADIUS server in the dialogic-trunk-grp-out VSA. Related lines are in bold.

14:15:32.116 CALL(SS7) (00:00001:00) RCVD IAM from (0x2:0x1:0)
14:15:32.116 CALL(SS7) (00:00001:00) SENT Setup Ind w/info (0x2:0x1:0) to L4
14:15:32.116 CALL(L4) (00:00001:00) RCVD Setup Ind from SS7
14:15:32.116 CALL(L4) (00:00001:00) SENT RFS to GCL
14:15:32.116 CALL(GCL) (00:00001:00) RCVD RFS DN=[617456789012] ANI=[121423501110] from L4
14:15:32.116 CALL(GCL) (00:00001:00) ANI APRI=[0],SI=[1],Category=[11]
14:15:32.116 CALL(GCL) (00:00001:00) SENT RADIUS AUTH REQUEST to RADIUS
14:15:32.116 CALL(GCL) (00:00001:00) Incoming Channel Group = 0 [ss7chiloe]
14:15:32.116 CALL(GCL) (00:00001:00) RCVD AUTH ACCEPT ACK from RADIUS
14:15:32.116 CALL(GCL) (00:00001:00) Using Radius DTG=[uas_grp]
14:15:32.116 CALL(GCL) (00:00001:00) Using Radius DN=[6172597306]
14:15:32.116 CALL(GCL) (00:00001:00) DPE Input :DN=[6172597306] ANI=[121423501110]
14:15:32.116 CALL(GCL) (00:00001:00) DPE input plus(+) sign mask 0x00000000
14:15:32.116 CALL(GCL) (00:00001:00) Invoke Incoming DPE 1; Channel Group 0
14:15:32.116 CALL(GCL) (00:00001:00) DPE response: Proc Complete
14:15:32.116 CALL(GCL) (00:00001:00) DPE Output:DN=[7812597306] ANI=[121423501110]
14:15:32.116 CALL(GCL) (00:00001:00) DPE output plus(+) sign mask 0x00000000
14:15:32.116 CALL(GCL) (00:00001:00) SENT Make Call Request to GCL
14:15:32.116 CALL(GCL) (00:00001:00) Using DTG[uas_grp] as OutgoingChanGroup [4]
14:15:32.116 CALL(GCL) (00:00001:00) Skip mid-stream router
14:15:32.116 CALL(GCL) (00:00001:01) Outgoing Channel Group = 4 [uas_grp]