Effective September 30, 2026, these products will reach End of Sale and therefore will no longer be available for purchase. Effective September 2028, these products will reach End of Life. After this date, regular updates, maintenance, and technical support will be discontinued in accordance with our product lifecycle policy. For a complete list of the affected SKUs, click HERE. |
|---|
Dialogic IMG - IMG 1010 - RADIUS - Login-IP-Host
Table of Contents
Radius Attribute: Login-IP-Host
As per RFC 2865:
This Attribute indicates the system with which to connect the user, when the Login-Service Attribute is included. It MAY be used in Access-Accept packets. It MAY be used in an Access-Request packet as a hint to the server that the NAS would prefer to use that host, but the server is not required to honor the hint.
A summary of the Login-IP-Host Attribute format is shown below. The fields are transmitted from left to right.
Type (IETF Attribute Number) - 14 for Login-IP-Host.
Length - 6
Address - The Address field is four octets. The value 0xFFFFFFFF indicates that the NAS SHOULD allow the user to select an address. The value 0 indicates that the NAS SHOULD select a host to connect the user to. Other values indicate the address the NAS SHOULD connect the user to.