AC Power Cables
Â
The following table lists some commonly ordered AC power cables
Â
Part number | Description |
---|---|
SLM-CBL-1000R | AC power cable - United States |
SLM-CBL-1001R | AC power cable - Europe |
SLM-CBL-1002R | AC power cable - UK |
SLM-CBL-1003R | AC power cable - Australia |
SLM-CBL-1004R | AC power cable - Italy |
SLM-CBL-1005R | AC power cable - China |
SLM-CBL-1006R | AC power cable - India, Africa, Pakistan |
SLM-CBL-1007R | AC power cable - Israel |
Â
Additional AC power cables are available upon request. Contact your Sangoma sales representative for more information.
Warning! Do not attempt to modify or use the supplied AC power cord if it is not the exact type required.
Â
In some cases, the power cord supplied with this system may not be compatible with the AC wall outlet in your region. If this is true, you must obtain a suitable power cord that meets the following criteria:
The cord must be rated for use at the AC voltage available, with a current rating that is at least 125% of the current rating of the product (for current rating information, refer to the UL label affixed to the product).
The AC plug end must be terminated in a grounding-type male plug designed for use in your region. The plug ends must be labeled or marked to indicate they have been certified by an agency acceptable in your region.
The power service must be connected through a properly grounded outlet. Do not use the external grounding lug on the rear of the IMG 2020 to ground the AC system. The grounding lugs are for grounding a IMG 2020 that is powered by DC.
The connector at the product end must be an IEC 320, sheet C13, female connector (or the equivalent EN 60 320 connector).
The cord must be less than 14.8 feet (4.5 meters) long and, for use in Europe, be created with <HAR> (harmonized) or VDE certified cordage.
If power needs to be removed from this product, you must disconnect the power cord; therefore, the socket-outlet shall be installed near the equipment and shall be easily accessible.Â
Â