Adding New Servers

Owned by Nathaniel Halbrooks
Jan 11, 2024
2 min read

  • Supported client machines are currently, only FreePBX Distro based appliances, such as FreePBX Distro, PBXact or AsteriskNow.
     

  • To add a new client machine, you simply click on 'Add Server' at the top of the screen

    Screen Shot 2015-01-10 at 4.53.19 PM.png

  • Provide the IP Address or Hostname of your PBX and the root password.  "We do not store the root password, it is only used to connect to the PBX and push your M3 SSH Key and from their forward all communications are done with the M3 SSH Key.  Press the "Add Server" button

    PBX M3 (3).png



  • This will then validate the client and the available licences. If successful, you will have a final opportunity to abort the import. Click 'Add Server' 

  • This will immediately add the Client to M3, configure it as per the Default group settings, and then take you to the server management page for the new client.

  • From here you can set the VPN IP address this PBX should be assinged and change the "Group" it belongs to.   Pressing the "Save" button will update the PBX with your changes.

Return to Documentation Home I Return to Sangoma Support