Feature Codes Admin User Guide

Overview

The Feature Code module is where you can view all the feature codes that are built into your PBX. You can perform the following actions for each feature code:

• Change a feature code number.

• Enable or disable the feature code.

Logging in

• On the top menu click Admin

• In the drop down click Feature Codes

Open

Customizing a Feature Code

You can customize a feature code by setting it to something different from the system default.

In our example we will look at the "blacklist a number" feature code. The default is *30. Notice the Code field is grayed-out and cannot be edited at this point.

Open

Select the Customize button. The button's color will change to dark blue. The background of the Code field will change to white, indicating that you can now edit it.

Enter the code you wish to use in the Code field.
In our example, we are changing the code to *9. 

Click the Submit button followed by the red Apply Config button.

Restoring a Feature Code to the System Default

It is easy to change a customized feature code back to its system default, and you do not have to remember what the original default was. The system will take care of it for you when you de-select the Customize option.

Your feature code is in a customized state if the Customize button is dark blue and the Code field has a white background and is editable.
For example, here we changed our Blacklist feature code to *9 as shown earlier.
 
 

To restore the default, simply click the Customize button again. It will change to light blue, the Code field will revert back to the default, and the field will not be editable.
In this example, the default code for blacklisting a number has been restored to the default of *30.
 
 

Click the Submit button followed by the red Apply Config button.

Enabling or Disabling a Feature Code

In the event that you would like to completely disable a feature code from being used, you can toggle the Enable/Disable option for it.

To disable a feature code, click the Enable button to turn it to light blue in color, then click the Submit button followed by the red Apply Config button.

To enable a feature code, click the Enable button to turn it to dark blue in color, then click the Submit button followed by the red Apply Config button.
 

Remember, the Enabled button shows whether you have selected an Enabled or Disabled state, but the settings aren't applied until you click Submit and Apply config. Also, remember dark blue=enabled and light blue=disabled.