PBX GUI - Variables-Version 2.10 and 2.11
The format noted on this page is only present in unsupported EPM versions, and is kept here only for historical purposes.
For current versions of Endpoint Manager see the main page here.
VARIABLE | USE | BRANDS |
|---|---|---|
%adminPass% | The Admin Password as defined in the Global Settings Section of EPM | ALL |
%amcolor% | AM identifier color for display on the AND clock as defined in the AND templates | AND |
%answer% | SIP allow auto answer as defined in the Aastra templates | Aastra |
%b1label% | Program button 1 label if the device supports showing a label on a LCD screen for this button. The variable can be %b1label% thru %b60label% representing each program button on a device. | MOST |
%b1type% | Program button 1 type such as speed-dial, BLF and others depending on what the device supports. The variable can be %b1type% thru %b60type% representing each program button on a device. | MOST |
%b1value% | Program button 1 value such as the speed-dial number that is dialled when button is pressed. The variable can be %b1value% thru %b60value% representing each program button on a device. | MOST |
%barge% | SIP intercom allow barge in as defined in the Aastra templates | Aastra |
%clockcolor% | Clock color for the display on the AND clock as defined in the AND templates | AND |
%clockfont% | Clock font for the display on the AND clock as defined in the AND templates | AND |
%colon% | Speed of colon blink for the display on the AND clock as defined in the AND templates | AND |
%destination% | This is the IP Address or FQDN that the phone will register to based on what is defined in each device template | ALL |
%directedCallPickup% | Feature code for directed call pick-up. | Snom |
%dndOff% | Feature code to dial to turn off Do Not Disturb as defined in the PBX Feature Code admin | Some |
%dndOn% | Feature code to dial to turn on Do Not Disturb as defined in the PBX Feature Code admin | Some |
%cfaOn% | Call Forwarding Always On | Vtech |
%cfaOff% | Call Forwarding Always Off | Vtech |
%cfnaOn% | Call Forwarding Not Available On | Vtech |
%cfnaOff% | Call Forwarding Not Available Off | Vtech |
%cfbOn% | Call Forwarding Busy On | Vtech |
%cfbOff% | Call Forwarding Busy Off | Vtech |
%cwOn% | Call Waiting On | Vtech |
%cwOff% | Call Waiting Off | Vtech |
%firmware% | The path to the firmware folder based on what you pick in the template | MOST |
%focus% | Switch focus to ringing lines defined as in the Aastra templates | Aastra |
%ftppass% | The FTP password to use for auto provisioning as defined in each device template | ALL |
%ftpserver% | The IP address of the configuration server to use for auto provisioning as defined in each device template | ALL |
%ftpuser% | The FTP username to use for auto provisioning as defined in each device template | ALL |
%fb% | Feedback suppression as defined in the AND templates | AND |
%keypress% | Code to unlock the door for Algo 8180 as defined in the Algo and CyberData templates | Algo, CyberData |
%line1Enable% | Whether to enable line 1 on the device based on extension mapping section of EPM for phones that support a enable or disable per line. The variable can be %line1Enable% thru %line24Enable% representing each line button that is programmed on the device depending on how many lines the device supports. | Some |
%line1Ext% | The extension number to be used for line 1 or the default line for each phone. This is pulled from the extension mapping page for each extension. The variable can be %line1Ext% thru %line24Ext% representing each line button that is programmed on the device depending on how many lines the device supports. | ALL |
%line1extPort% | The SIP port for the Extension assigned to account 1. This is pulled from the extensions module. The variable can be %line1extPort% thru %line24extPort% representing each line button that is programmed on the device depending on how many lines the device supports. | ALL |
%line1Name% | The extension name to be used for line 1 or the default line for each phone. This is pulled from the extension name in your PBX based on the extension number associated with this line. The variable can be %line1Name% thru %line24Name% representing each line button that is programmed on the device depending on how many lines the device supports. | ALL |
"%line1Pass%" | The extension password to be used for line 1 or the default line for each phone. This is pulled from the extension SIP secret in your PBX based on the extension number associated with this line. The variable can be %line1Pass% thru %line24Pass% representing each line button that is programmed on the device depending on how many lines the device supports. | ALL |
%line1VMPass% | The extensions voicemail password to be used for line 1 or the default line for each phone. This is pulled from the extension set voicemail password in your PBX based on the extension number associated with this line. The variable can be %line1Pass% thru %line24Pass% representing each line button that is programmed on the device depending on how many lines the device supports. | ALL |
%line1type% | What type of function the Line key 1 will be. The variable can be %line1type% thru %line8type% representing each line button on the phone | Grandstream |
%line1acct% | What account the the Line key 1 will be tied to. The variable can be %line1type% thru %line8type% representing each line button on the phone | Grandstream |
%line1label% | What will be displayed on the Line key 1 LCD display. The variable can be %line1type% thru %line8type% representing each line button on the phone | Grandstream |
%line1value% | If the line key is setup for something like a BLF or Speed-dial this would be what number is dialled or monitored for line key 1. The variable can be %line1type% thru %line8type% representing each line button on the phone | Grandstream |
%linekeys% | The number of line keys each registered user should take up for Polycom phones only | Polycom |
%micvolume% | Mic volume as defined in the AND templates | AND |
%missed% | Whether to display missed calls on the device for Polycom Phones only as defined in the Polycom templates. | Polycom |
%model% | Model of phone as defined in the Extension Mapping for Audio Codes and CyberData | Audio Codes, CyberData |
%msgfont% | Message font for the display on the AND clock as defined in the AND templates | AND |
%msgcolor% | Message color for display on the AND clock as defined in the AND templates | AND |
%multicastAddress% | Multicast address and port, comma separated. Also used are %multicastAddress2% - %multicastAddress6% | Some |
%multicastEnable% | Multicast enable | Some |
%mute% | SIP intercom mute mic as defined in the Aastra templates | Aastra |
%offset% | GMT time offset | Polycom |
%offhook% | Auto off hook as defined as in the Aastra templates | Aastra |
%outboundcid% | Outbound Caller ID from extensions. | All |
%pincode0% | Pin code for unlocking door on Cyberdata devices. The variable can be %pincode0% thru %pincode9% as defined in the Cyberdata templates | CyberData |
%pmcolor% | PM identifier color for display on the AND clock as defined in the AND templates | AND |
%PriAcctName% | Primary Account Name | All |
%pringtone% | Audio page tone for the Algo 8180 as defined in the Algo templates | Algo |
%pvolume% | Audio page volume for the Algo 8180 as defined in the Algo templates | Algo |
%protocol% | Download protocol as defined in each device template | ALL |
%provisionAddress% | The IP address of the configuration server to use for auto provisioning as defined in each device template | Some |
%provisionport% | HTTP port to use for provisioning as defined in the global settings section of EPM | ALL |
%restapps% | RESTapps file location | Aastra/Digium/Yealink |
%rringtone% | Audio ring tone for the Algo 8180 as defined in the Algo templates | Algo |
%rvolume% | Audio ring volume for the Algo 8180 as defined in the Algo templates | Algo |
%seccolor% | Second color for display on the AND clock as defined in the AND templates | AND |
%seconds% | Whether to display seconds on the AND clock as defined in the AND templates | AND |
%sipPort% | SIP port to use for SIP as defined in the global settings section of EPM | ALL |
%speeddial1% | Speed-dial for button number 1 on the phone as defined in the device template for devices that support this feature. The variable can be %speeddial1% thru %speeddial9% representing numbers 1-9 on the keypad of the phone. | Some |
%spkrvolume% | Speaker volume as defined in the AND templates | AND |
%stutter% | Stutter disabled as defined as in the Aastra templates | Aastra |
%timeformat% | Time format as defined in the AND templates | AND |
%timeout% | SIP digit timeout as defined in the Aastra templates | Aastra |
%timeserver1% | Time server1 as defined in the device templates. | ALL |
%timeserver2% | Time server2 as defined in the device templates if they support 2 time servers | Some |
%timeserver3% | Time server3 as defined in the device templates if they support 3 time servers | Some |
%timezone% | Time zone code as defined in the Device templates for the time zone | ALL |
%timezone2% | Time zone code for Panasonic UT670 only as defined in the Panasonic template for the time zone | Panasonic |
%timezonembu% | Time zone code for Aastra MBU400 only as defined in the Aastra template for the time zone | Aastra |
%timezonename% | Time zone name as defined in the Aastra, Xorcom, Yeaklink templates for the time zone | SOME |
%toneset% | Tone set as defined in the Aastra templates | Aastra |
%userPass% | User password as defined in the Global Settings Section of EPM | ALL |
%version% | Version of the firmware that is used as defined in the device templates | Panasonic |
%voicemail% | Feature code to dial to access the voicemail system as defined in the PBX Feature Code admin | ALL |
%webport% | Port for Aastra XML scripts as defined in the Global Settings section | Aastra |
%z001% | Zone controllers for the Cyberdata Zone Paging Server. The variable can be %z001% thru %z144% as defined in the Cyberdata templates | CyberData |