Send a Key to Open the Door through GXV350X Video Gateway.

Owned by Nathaniel Halbrooks
Dec 15, 2023
1 min read

 

 

When you've an automatic gate connected on this kind of device sometime you need to open or close the door using a code.
Assuming your device is 146, and code is 1234 to open or close the door, then you must dial 146, wait and dial 1234# and hangup.

The dialplan below can do it only dialing 150.

[gate]
exten => 150,1,NoOp(--  Gate --)
exten => 150,n,Playback(order-gate)
exten => 150,n,dial(SIP/146,3,L(3000:1000:1000)D(1234#))
exten => 150,n,hangup()

 

 

Custom prompt
Dial 146, send 1234# and hangup call after 3 seconds.
Hangup

This dialplan can be adapted for other usages as well.

Return to Documentation Home I Return to Sangoma Support