/
Installing PBXact on your own hardware

Installing PBXact on your own hardware

 

  • Download the FreePBX 15 Distro from the download page at Download | FreePBX - Let Freedom Ring
    Note: FreePBX 15 will turn into PBXact 15 once a PBXact deployment is activated. 

  • Follow the instructions for installing the PBX Distro outlined on this page Installing FreePBX Official Distro

  • Once the install process is complete, locate your Deployment ID number from the Sangoma Portal or from your Invoice, and issue the following command:

fwconsole sysadmin activate XXXX     (Replacing XXXX with your deployment ID)

  • The activation process will install additional RPMs, and make the necessary changes to the GUI behind the scenes. The end result is a complete new PBXact system.  This process takes about 3-4 minutes.  

  • When completed you can run the following End of Line testing and all checks should come back Passed.  If you have any failed checks wait 5 minutes and run again.  If you still have failed checks please open a support ticket here.

fwconsole sa eol

If you get same FAILED here , run 

fwconsole ma installlocal ; fwconsole ma upgradeall ; fwconsole reload

 

          Wait 1-2 mins and run the End of Line test and it should now show PBXact and all passed

 

fwconsole sa eol

Related content

PBXact Features
PBXact Features
Read with this
Converting FreePBX Appliance to PBXact
Converting FreePBX Appliance to PBXact
More like this
Activating or Update XactView license
Activating or Update XactView license
Read with this
Convirtiendo un Appliance de FreePBX a PBXact
Convirtiendo un Appliance de FreePBX a PBXact
More like this
Upgrade to PBXact 16
Upgrade to PBXact 16
More like this
Upgrade to PBXact 15
Upgrade to PBXact 15
More like this
Unable to render {include} The included page could not be found.