Overview

EHS30 Included Contents

Open

• EHS30

• 3.5MM DC Jack

• RJ12 Cord

• RJ45 Cord

EHS30 Ports

Open

1. RJ-12 Port for IP Phone EXT/EHS or Expansion Module

2. Operation LED

3. 3.5mm DC Power Jack

4. RJ-45 Jack

Headset Base and Phone Ports

CS5XX Series Installation with EHS30

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Plantronics Wireless Headset base unit. See the detailed instructions below.

1. Connect the Plantronics wireless headset base unit to the RJ-9 headset port on the IP phone, using the telephone interface cable provided by Plantronics.
   
   Plantronics Telephone Interface Cable
   
   

   
   
   Telephone Interface Cable Port on CS5XX Headset Base
   
   

   
   
   Headset Port on Sangoma s700 Phone
   
   

2. Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1) and the EXT/EHS Port of the Sangoma phone.
   
   RJ12 Port on EHS30
   
   

   
   
   EXT/EHS Port on Sangoma s700 Phone
   
   

3. Connect the included 3.5mm DC Power Port (Port 3) of the EHS30 Adapter to the handset lifter/EHS cable port on the Plantronics wireless headset base unit.
   
   DC Power Port on EHS30 Adapter
   
   

   
   
   Handset Lifter/EHS Cable Port on CS5XX Headset Base
   
   

4. Connect the headset base station's power cable between the DC port on the base station and a power outlet.
   
   DC Power Port on CS5XX Headset Base
   
   

    
   
   
   

    

W7XX Series Installation with EHS30

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Plantronics Wireless Headset base unit. See the detailed instructions below.

1. Connect the Plantronics wireless headset base unit to the RJ-9 headset port on the IP phone, using the telephone interface cable provided by Plantronics.
   
   Plantronics Telephone Interface Cable
   
   

   
   
   Telephone Interface Cable Port on W7XX Headset Base
   
   

   
   
   Headset Port on Sangoma s700 Phone
   
   

   
    

2. Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1) and the EXT/EHS Port of the Sangoma phone.
   
   RJ12 Port on EHS30
   
   

   
   
   EXT/EHS Port on Sangoma s700 Phone
   
   

   
    

3. Connect the included 3.5mm DC Power Port (Port 3) of the EHS30 Adapter to the handset lifter/EHS cable port on the Plantronics wireless headset base unit.
   
   DC Power Port on EHS30 Adapter
   
   

    
   
   Handset Lifter/EHS Cable Port on W7XX Headset Base
   
   

    

4. Connect the headset base station's power cable between the DC port on the base station and a power outlet.
   
   DC Power Port on W7XX Headset Base