Phones - How do i get my Digium D40 and D50 phones to work on LLDP

How do i get my Digium D40 and D50 phones to work on LLDP

1. Click Server-> Phone Networks.

2. Modify the IP range for your VLAN by clicking the pencil icon.

3. Click Advanced Settings.

4. Verify if LLDP is selected for VLAN Discovery Mode.

On the Digium phone 

5. Press the settings soft key

6. Press the number 5 to select VLAN Settings

7. Press the right arrow twice to set the Discovery Mode to Manual.

8. Enter your VLAN ID and VLAN QoS into the input blocks.

9. Submit the changes and reboot the phone. 

When the phone reboots it will connect to the proper VLAN and pull down its configuration.