/
Phones - How do I set up a 9470 Jabra Headset w/JABRA LINK 14201-17 Electronic Hook Switch?

Phones - How do I set up a 9470 Jabra Headset w/JABRA LINK 14201-17 Electronic Hook Switch?

The steps below are to set up a 9470 Jabra Headset with a JABRA LINK 14201-17 Electronic Hook Switch:

  1. Plug the power cable into your power outlet and into the yellow port on the back of the headset base

  2. Plug the blue marked cord into the blue port on the back of the headset base and the other end into the headset port on the Digium phone base

  3. Plug the red marked end of the JABRA LINK 14201-17 cord into the red AUX port on the back of the headset base and the other end into the EHS port on the Digium phone base

  4. Do not unplug the handset from the Digium phone, leave that as it is

  5. On the Jabra base touch screen, choose your language preference

  6. Select Yes to connect to a desk phone

  7. Choose Manual Desk Phone Setup

  8. Scroll down and select IQ as the Adapter

  9. You should be able to leave the Clear Dial-tone Switch to A

If you like you can set up your personal preferences as well as see a walk through on using the headset.

 

Related content

Return to Documentation Home I Return to Sangoma Support