The following content only applies to FreePBX and PBXact platforms

How to Regenerate the Sangoma Connect Domain

Owned by Kapil Gupta
Last updated: Feb 19, 2024
2 min read

 

Follow the steps below to regenerate the Sangoma Connect Domain.

  1. Navigate to Admin—>SangomaConnect

  1. Click on the “Run Domain Action“ button , select “remove domain”  and press the process button.

 

  1. After removing the Domain , click the “Run Domain Action” button again. Select “register domain”  and press the process button.
     

 

 

 

  1. Prees the “Enable Sangoma Talk” button to start the service.

 

 

  1. Confirm that the Sangoma Talk and cloud agent status are running.

 

  1. Select All the users and press the “Invite Users” button to Send the Invitation then press the “OK” button to confirm.

image-20240219-125336.png

 

7.Open the invitation Email on your Mobile device and press the “LOGIN NOW” button to register Sangoma Talk Application.

 

  1. Confirm that the account status is registered.

Return to Documentation Home I Return to Sangoma Support