Switchvox - 470 powering back on after being shutdown from GUI

There are several power management options available for shutdown behavior on the Switchvox 470, to access these settings follow the steps below:

1. Restart the Switchvox

2. Press F2 at startup to enter BIOS setup

3. Select the Server Management tab

4. Select resume on AC power loss

Below are the settings available for this field

• [Shutdown] This will cause the system to remain off after any shutdown command is received.

• [Last State] This will cause the system to power on 30 seconds after any shutdown caused by a power interruption, or remain off if a shutdown command is entered from the Web UI

• [Restart] This will cause the system to power on 30 seconds after any shutdown command is received.