Switchvox - How to rebuild a RAID 1 on a Switchvox 470
When the RAID array is degraded in a Switchvox 470 there is a loud constant beeping of one second on one second off. This can be resolved by rebuilding the RAID array. Note: You will need a monitor and keyboard connected to the Switchvox to complete the following steps:
Restart the Switchvox
On boot up wait for the prompt and press Ctrl + H
On the next screen press Start as this is the only Raid on the system
On this screen highlight the unconfigured or missing drive and select Physical View from the left.
Check the circle Make Unconf Good and click Go
Check the cicle Replace Missing Pd and click Go
Click Back
Highlight the offline drive
Check the Circle Rebuild Drive and click Go
The Drive should now rebuild. One finished exit the utility and the system should reboot and start up normally.