/
How to Connect A SIP Provider as a Peer

How to Connect A SIP Provider as a Peer

This is useful for when the provider does not require authentication and does not provider a Username/Password for the SIP trunk connection. This is set up by going to the Setup tab and selecting VoIP Providers.

  1. Fill out the Provider Information tab as normal. The difference here is that you will still need to fill in the Password field but you can put anything here that you wish, just as long as something fills in the field. 

  2. Next select the Provider Information tab

  3. Navigate to Peer Settings

  4. Change Host Type to Peer

  5. Save the changes

Related content

SIP Configuration Using the Type Option
SIP Configuration Using the Type Option
More like this
SIPStation and FAXStation - How to Setup SIP Station as PJSIP Trunks
SIPStation and FAXStation - How to Setup SIP Station as PJSIP Trunks
More like this
How to setup a basic SIP peer between two Switchvox PBXs
How to setup a basic SIP peer between two Switchvox PBXs
More like this
Setup QSC DE SIP trunks
Setup QSC DE SIP trunks
More like this
Open Source - How to configure a Digium SIP Trunking account with Asterisk using chan_sip
Open Source - How to configure a Digium SIP Trunking account with Asterisk using chan_sip
More like this
SIP TRUNKS - Provider Specific
SIP TRUNKS - Provider Specific
More like this
Unable to render {include} The included page could not be found.