Switchvox - Replacing Hard Drives With RAID Card In Switchvox Appliance

In an appliance with a RAID configuration, Sangoma recommends replacing a bad hard drive with a drive that is the same make, model, and capacity of the existing drive. Or, replace both drives with identical drives. Then rebuild the RAID Array (see Switchvox - How to rebuild a raid array in a Switchvox 380/450/470 ); or you can search our knowledge base articles for instructions on the type of RAID card installed in the appliance here.

On the 360 appliance, if the hard drives are not detected, the server will default to PXE boot. After the hard drives are plugged back in, if the server still attempts a PXE boot, then you must adjust the BIOS settings to place the hard drives back to the first boot priority. Reboot (cycle power) to enter BIOS (on most appliances, press Delete or F2 during POST). Next, select Boot Menu, from top menu bar, to get to Boot Options; and set the hard drive first in the boot order.