Firmware Downloads


This page describes the currently available software releases for the Sangoma Vega Media Gateways. In almost all cases, the correct software to use is the Recommended GA release for your hardware.

The release for some Vega gateways may include an accompanying DSP release.

If you require any assistance please contact Sangoma Support.

Recommended (GA) Releases

General Availability (GA) releases are the recommended releases for the majority of customers and deployments. They support the full range of platforms and features.

Release 12.0 GA Releases

 

 Product

Recommended (GA) Release

Vega 100G, 200G, 400G, 400GF 

VEGA_R120S031

 

 

| Released: 2024-10-10 | Release Notes

Vega 4x4

VEGA_R120S031

 

| Released: 2024-10-10 | Release Notes

Vega 60G V2

VEGAARMv2_R120S031

 

 

| Released: 2024-10-10 | Release Notes

Strictly for Vega 60Gv2 FXS and FXO devices.

This must not be used on BRI units. A small number of Vega 60G BRI units have been incorrectly labelled as 60Gv2. These are not v2 variants and loading the v2 firmware will cause serious issues. If you have an affected unit please contact support to arrange a replacement.

Vega 3000G , Vega 3050G, 60G

VEGAARM_R120S031

 

 

| Released: 2024-10-10 | Release Notes

Do not install on Vega 60Gv2 FXS and FXO

Release 13.1 GA Releases

Note that in release 13.0 and above the default password on install will be set to the serial number of the unit with all characters in lower case. This can be found on the regulatory label attached to the unit or on the packaging.

 Product

Recommended (GA) Release

Vega 100Gv2, 200Gv2, 400Gv2 

VEGA_R131S009

 

Limited Availability Releases

For a full description of the changes and features in Release 13.0 please refer to Vega Release 13.0

Release 13.0 Limited Availability

 Product

Latest 13.0 LA Releases

Vega 100G, 200G, 400G 

 

R130S003

 

| Released: 2021-08-19 | Release Notes

Vega 3000G , Vega 3050G, 60G



R130S001

 

| Released:  2020-06-12 |  Release Notes

Do not install on Vega 60 V2

 

Return to Documentation Home I Return to Sangoma Support