Vega 200 G VoIP Gateway

Open

View Data Sheet

The Vega 200G VoIP Gateway is the most resilient single-span gateway in its price class.

• Fixed configuration of 60 VoIP calls

• Branch office survivability: Calls on your network stay up in the event the phone network goes down

• Configuration is SNAP with the Sangoma Network Appliance Provisioning GUI tool

• Flexible call routing for fallback and least cost routing

• Emergency PSTN backup

• Voice, fax and modem support

• Interoperability with a wide range of legacy and IP equipment

• Supports dual gigabit Ethernet connections

• Lync tested and qualified

THE MOST RESILIENT VOIP GATEWAY IN ITS CLASS

The Vega 200G VoIP gateway connects digital telephony equipment to IP networks. Each unit purchased is factory configured with a maximum capacity of 60 simultaneous calls.

The available Sangoma Resiliency Enablement Suite (SRES) makes the Vega 200 the most resilient gateway in it is class. In the event of a WAN failure, IP phones behind the Vega gateway can continue to call each other, be routed to a backup switch or connected directly to the PSTN. In addition, the use of the Sangoma Network Appliance Provisioning (SNAP) tool makes the Vega 200 the easiest to provision gateway on the market.

Each E1/T1 interface can be independently configured as network side or terminal side. The Vega 200 gateway can therefore be connected to a PBX or the PSTN. This configuration provides:

• No disruption to the configuration of existing equipment

• Flexibility & choice for call routing

OPEN, NON-PROPRIETARY INTERFACES

The Vega 200G gateway supports the following signalling schemes:

• ETSI, VN4, ISDN

• NI1, NI2, AT&T 5ESS, DMS100

• ISO QSIG Basic Call & QSIG feature transparency

• Channel Associated Signalling (CAS)

• R2 MFC

All Vega gateways support SIP and T.38 Fax.

The Vega 200G gateway has proven interoperability with a wide range of existing telecommunications and VoIP equipment.

Service Provider Applications:

• Customer premises gateway for SIP trunking

• Low-density PSTN gateway

• Survivability for IP phones

Enterprise Applications:

• Enterprise VoIP networking

• PSTN trunking for IP-PBXs

• Enterprise IP telephony gateway

Interfaces

VoIP

• SIP

• Audio codecs:

  • G.711 (a-law/µ-law) (64 kbps)

  • G.729a (8 kbps)

  • G.723.1 (5.3/6.4 kbps)

  • G.726

• Fax Support – up to G3 Fax, using T.38

• Modem Support – up to V.90, using G.711

• Up to 60 VoIP channels

Telephony Interfaces

Primary Rate ISDN (User configurable NT/TE):

E1

• Euro–ISDN

• ISO QSIG

• VN4

• CAS R2MFC

T1

• NI1/NI2

• AT&T 5ESS

• DMS100

• CAS (RBS)

• ISO QSIG

LAN Interfaces

• 2 RJ–45s, 1000 BaseT / 100 BaseTX / 10 BaseT, full / half duplex

Features

Identification

• Caller ID presentation

• Caller ID screening allows connections to be accepted only from selected call sources

• SIP Registration & Digest Authentication

Operations, Maintenance & Billing

• HTTP(S) web server

• RADIUS Accounting & Login

• Remote firmware upgrade:

  • Auto code upgrade

  • Auto configuration upgrade

• SNMP V1, V2 & V3

• TFTP/FTP support

• VT100 – RS232

Routing & Numbering

• Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration

• Direct Dialing In (DDI)

• SIP registration to multiple proxies

• NAT traversal

Security & Encryption

• Management – HTTPS, SSH, Telnet

• Configurable user login passwords

Call Quality

• Adaptive jitter removal

• Comfort noise generation

• Silence suppression

• 802.1p/Q VLAN tagging

• Differentiated Services (DiffServ)

• Type of Service (ToS)

• QoS statistics reporting

• Echo cancellation (G.168 up to 128ms)

Hardware

Certification

EMC (ClassB)

• EN55022

• EN55024

• FCC Part 15

• AS/NZS3548

• VCCI

Safety

• EN60950

• IEC60950

• UL60950

• AS/NZS60950

Telecoms (ISDN)

• E1: TBR4

• T1: FCC Part 68

• T1: CS-03

Environmental

• 0° .. 40°C

• 0% .. 90% humidity (non-condensing)

Indicators

LED:

• Power

• ISDN: NT/TE & Link up

• LAN: speed / activity

Dimensions

• 270mm(W) x 155mm(D) x 43mm(H)

• Weight: 1.2kgs

• Rackmount ears supplied: 107mm (2-pieces)

Power

• 100..240 VAC, 47..63 Hz, 1..0.5 A (24 Watt)

Program Storage

• Code & configuration data are stored in FLASH & executed from RAM