Vega 4 x 4 VoIP Gateway

 



 

 

Sangoma’s Vega 4 x 4 connects analog private wires, audio sources and the PSTN to SIP networks for up to 16 calls

Up to 4 modules, each supporting 4 ports, are manually installed into the chassis, providing FXO, FXO, GenGen, Audio Ports to the RJ45 connectors 

End User Module Installation Required. This requires End-User to open Vega 4x4 chassis. Please refer to the Module Install Guide above.

 

Applications

  • Connect dealerboards to legacy analog private wire connections

  • Bring audio sources, such as TV, into the SIP network

  • Connect worldwide private wires regardless of what's at the other end

  • Provide standards-based SIP private wires

  • Connect multiple analog sources to SIP infrastructure

Open, Non-Proprietary Interfaces

The Vega 4x4 Supports SIP and T.38 Fax

Four module slots are available for different module types, each with 4 ports, and can be populated in any configuration.

The module types available are:

  • FXO for connection to PBX extension lines or the PSTN

  • FXS for connection to analog telephones or trunk ports

  • Audio for connecting two-way audio sources

  • SIP to SIP call routing

  • GenGen for connecting GenGen or magneto type lines 

The Vega 4x4 gateway has proven interoperability with a wide range of existing telecommunications and VoIP equipment.

ENP – Enhanced Network Proxy (Optional)

This option enables continuity of service during WAN/SIP outage and may be configured to operate in a number of ways including:

  • Standalone proxy

  • IP device survivability

  • IP device call routing

  • Emergency call routing

  • SIP to SIP call routing

Density

  • With up to 16 ports of FXS, FXO, GenGen, Audio (dependent on the type of module(s) installed) in a chassis that is only 1U high & half a rack deep, these gateways provide exceptional density

 

Interfaces

VoIP

  • SIP

  • Audio codecs:

    • G.711 (a-law/µ-law)

    • G.729a

    • G.723.1 (5.3/6.4 kbps)

    • G.726

  • FAX Support – up to G3 FAX, using T.38

  • Modem Support – up to V.90, using G.711

  • 16 VoIP channels

Telephony Interfaces

  • FXS

    • Up to 16 ports presented on RJ45

    • 600R, 900R or CTR-21 line impedance

  • FXO

    • Up to 16 ports presented on RJ45

    • 600R, 900R or CTR-21 line impedance

  • GenGen

    • Up to 16 ports presented on RJ45

    • 75V RMS ringing

  • Audio

    • Up to 16 ports presented on RJ45

    • Unbalanced audio input, receive (mic) and transmit (speaker)

LAN Interfaces

  • 2 RJ-45s, 10 BaseT/100 BaseTX, full/half duplex

 

Features

Telephony Features

Available on FXS ports:

  • Call Waiting

  • Call Forward – Unconditional, Busy, No-Answer

  • Call Transfer – Blind, Consultative

  • 3-Way Conference

  • Do Not Disturb

  • Message Waiting Indicator – Audible, Visual

  • Music on Hold

  • Executive Barge

Identification

  • Caller ID presentation – UK, DTMF, Bellcore GR30, ETSI

  • Caller ID screening allows connections to be accepted only from selected call sources

  • SIP Registration & Digest Authentication

Operation, Maintenance & Billing

  • HTTP(S) web server

  • RADIUS Accounting & Login

  • Remote firmware upgrade:

    • Auto code upgrade

    • Auto configuration upgrade

  • SNMP V1, V2 & V3

  • Syslog

  • TFTP/FTP support

  • VT100 – RS232

  • Telnet/SSH

  • TR-069

  • Voice readback of IP parameters

Routing & Numbering

  • Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration

  • Direct Dialing In (DDI)

  • SIP registration to multiple proxies

Call Quality

  • Adaptive jitter removal

  • Comfort noise generation

  • Silence suppression

  • 802.1p/Q VLAN tagging

  • Differentiated Services (DiffServ)

  • Type of Service (ToS)

  • QoS statistics reporting

  • Echo cancellation (G.168 up to 128ms)

Security & Encryption

  • Media – SRTP (Optional)

  • SIP – TLS (Optional)

  • Management – HTTPS, SSH Telnet

  • Configurable user login passwords

  • Enhanced Network Proxy (ENP) (Optional)

 

Hardware

Certification

EMC (Class A)

  • EN55022

  • EN55024

  • FCC Part 15

  • AS/NZS3548

  • VCCI

Safety

EMC (Class A)

  • EN60950

  • IEC60950

  • UL60950

  • AS/NZS60950

Telecoms

  • TBR21

  • FCC Part 68

  • CS-03

Protection

FXS port surge protection – K.20, K.21, GR1089

Environmental

  • 0°..40°C

  • 0%..90% humidity (non–condensing)

FXS Line Length

  • 1500ohm, up to 8km

Indicators

LED:

  • Power

  • System ready

  • LAN: speed/activity

Physical Dimensions

  • 440mm  x 45mm (1.7″) x 250mm  width/height/depth

  • Weight: 2.7kgs

  • Rackmount: brackets supplied 483mm (19″) 1U

Power

  • 100..240 VAC, 47..63 Hz, 1..0.5 A for 24 ports or 100..240 VAC, 47..63 Hz, 2..1 A for 48 ports

  • -48V DC, 1.2A (Max) available subject to MOQ (Optional)

 

Return to Documentation Home I Return to Sangoma Support