Vega Gateways - How to send calls from Vega 60G to multiple sip destination
- Kelli Higdon
The following information will guide you how to send some of your FXS ports calls to one SIP endpoint and other FXS ports to a another SIP endpoint.
For the example below, we will use a vega60 with 4 FXS ports, but the information can be applied to all Vega analog gateways
Goal:
Calls from FXS ports 1 and 2 are going to the first SIP endpoint ( Switchvox in this example )
Fax Calls from FXS port 3 and 4 are going to the second SIP endpoint.( Vega 100 G in this example )
Vega 60 ip address : 10.10.26.112
Switchvox ip address : 10.10.26.25
Vega 100G ip address: 10.10.26.113
1) The first step is to configure 2 SIP profiles.( profile1 interface ID 9901, and profile 2 interface ID 9902 )
Here is a screenshot of what you should have after you have created both SIP profiles. This is visible after clicking 'SIP' from your Vega WebGUI
a) Local domain in profile 1 is the first endpoint , update the proxy and the registrar accordingly
b) Local domain in profile 2 is the second endpoint , update the proxy and the registrar accordingly
( registrar setting is optional )
C ) On Vega 60 ,update your dial plan for To_SIP as below : ( This will cover outgoing calls , from vega 60G (FXS3,4 ->vega 100G →PRI line )
from vega 60G (FXS1,2 >switchvox>Sip trunk)
d) On Vega 100G , repeat step 1 , profile 1 goes to switchvox and profile 2 goes to vega 60
e) on Vega 100G , update dial plans as below: (incoming call from PRI→Vega 100G → Switchvox ) ,Incoming fax → Vega 100G → Vega 60 → FXS 3,4 )
Add a Dial plan , To-Vega . If called number from outside is 1450 , send it to profile 2 ( 1450 is the fax number called from outside , you can change it to your fax number )
other calls will go to profile 1 ( dial plan To_SIP )
f) in vega 60 , update your FXS ports caller ID , example. I want to send faxes with fax number 1450 to FXS 3 , so I update caller ID on port 0103 to 1450