Declaration of Conformity -

Open

Declaration of Conformity Certificate

Approvals -

Open

Approval Certificate

SIP / H.323 Dual boot operation -

Open

Guide on how to select H.323 or SIP operation at initial power on

Safety and Compliance Information -

Open

Safety and Compliance Information for all Vega gateway installs

SIP Quick Start Guide -

Open

Quick Config guide for R8.1 and later

Quick SIP Config Reference -

Open

Quick Config User Manual for R8.1 and later

R7 H323 with Gatekeeper -

Open

Configuring Vega 400, H323, release 7

R8 SIP With Proxy and Standalone -

Open

Configuring the Vega 400 in release 8

R7 SIP With Proxy and Standalone -

Open

Configuring the Vega 400 in release 7

R2MFC configuration -

Open

How to configure E1 Vega gateways to support R2MFC and how to take traces of R2MFC call tones and line signalling

E1 / T1 connection Checklist -

Open

Steps to ensure that an E1 / T1 Vega gateway is configured to connect to the network correctly

Microsoft OCS

Guides to using Vega gateways with Microsoft OCS

Telecount Radius Server

Open

A guide to using the Telecount Radius server to collect Radius billing info

CISCO AS5300 / Vega Guide -

Open

How to configure Release 4, 5 and 6 Vega gateways and Cisco AS5300s to interoperate

BroadSoft with Vega 400 -

Open

Guide to configuration of, and interoperation of Vega with BroadWorks R11.1

Vega 400 LAN configuration -

Open

How to configure the two LAN interfaces on the Vega 400 for single and dual LAN interface operation

Vega between PBX and ISDN -

Open

Configuration parameters to allow an ISDN Vega to transparently pass calls between its two ISDN trunks

Rack Mount Instructions -

Open

How to use the rack mount brackets provided to install the Vega in a 19inch rack

Introduction to Vega Dial Plans -

Open

How to write dial plans to route, authenticate and apply number translation to incoming calls before onward routing

Vega Provisioning -

Open

How to Configure Vega Provisioning