To configure a Linksys PAP2t ATA Device please do the following:
Determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack, then dial: **** (four asterisks), then dial: 110 #. This will tell you the IP address of your device (example: 192.168.1.100)
Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS> (Replace <IP ADDRESS> with the address that was given to you in STEP 1.)
Click the Admin Login link in the top right
Click on the link to 'Switch to advanced view' found in the middle of the top part of the page
Click on Line 1 from the categories along the top of the page.
Set the following items:
Proxy: Your IP address
Register Expires: 120
Display Name: The extension it will be assigned
User ID: The extension it will be assigned
Password: The Phone Password. In the /admin interface for Switchvox, go to Setup > Manage > Click on Modify for the extension > go to Phone Settings > Common Settings. ** This is not the same as the numeric password under Profile Settings. **
Auth ID: The extension it will be assigned
Click on Save settings.
