SS7 - Destination - ISUP Group - Location Override

When a call is released, the RELEASE and RELEASE COMPLETE messages communicate information during the Call Clearing Process. One of the more important pieces of information is the LOCATION field. The location field describes what part of the network was the reason the RELEASE message was issued. The location override can be used to override the location value sent by the IMG 2020 in the Cause Indication parameter in the Release (REL) message within an SS7 call.

Web GUI Page

Dialogic > SS7 > SS7 Network > SS7 Stack > SS7 Destination > ISUP Group > New Location Override

Maximum Objects

One Location Override object per ISUP Group object.

Related Topics and Dependencies

The Location Override object is created under an specific ISUP Group. The Location Override object is used to either override or ignore one or all of the Location parameters in any calls that get released from this ISUP Group. The complete SS7 network along with all of its objects must first be configured. Once they are configured, the Location Override can be created and configured. The Default setting of the Location Override object is to Ignore overriding the parameters.

SS7 - Destination - ISUP Group - BCI Override

Configure SS7

Field Descriptions

Location Override

Select from a drop down menu whether to Override the location value in the RELEASE message.

Ignore (default) - Do not override. Propagate Location and Coding Standard to RELEASE message.

Override - Override the location number with the settings selected below.

Location

If Override is enabled, select from drop down menu one of the following options.

User (default) - Change the Location parameter to Message Generated by User.

Local Private Network - Change the Location parameter to Message generated by private network serving the local user.

Local Public Network - Change the Location parameter to Message generated by public network serving the local user.

Transit Network - Change the Location parameter to Message generated by transit network.

Remote Public Network - Change the Location parameter to Message generated by public network serving the remote user.

Remote Private Network - Change the Location parameter to Message generated by private network serving the remote user.

International Network - Change the Location parameter to Message generated by international network.

Network Beyond Interworking Point - Change the Location parameter to Message generated by network beyond inter-working point.

Coding Standard

If Override is selected in Location Override field then select from drop down menu one of the choices below.

CCITT (ITU-T) - Change the Coding Standard to CCITT in the Release (REL) message.

ISO/IEC Standard - Change the Coding Standard to ISO/IEC in the Release (REL) message.

National Standard - Change the Coding Standard to National Standard in the Release (REL) message.

Standard for Network Side of Interface - Change the Coding Standard to Standard for Network Side of Interface in the Release (REL) message.