Information
Dialogic NaturalAccess Software is use to create development and runtime environment for creating voice, fxs, conferencing and video application using the Dialogic CG Series Media Boards.
Introduction
By default, the Dialogic NaturalAccess™ installation configures the drivers for 250 ports. This value can be reconfigured if required, for example, to reduce the memory consumed by the drivers.
Procedure
Open the /usr/kernel/drv/agsw.conf file. This file contains configuration information for the switching driver, agsw.
Modify the number-ports line to reflect the number of ports supported by the hardware. A value of 0 tells the driver to use the default of 250. For
number-ports=100
Open the /usr/kernel/drv/ag95sw.conf file. This file contains configuration information for the switching driver, ag95sw.
Modify the number-ports line to reflect the number of ports supported by the hardware. For example:
number-ports=100
Open the /usr/kernel/drv/agmx.conf file. This file contains configuration information for the mux driver, agmx.
Modify the ag-ports line file to reflect the number of ports supported by the hardware. For example:
ag-ports=100
After making the changes you must reboot the PC.Â