Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

IMG 1010 - Creating a Channel Group

  • Right-click Routing Configuration and select New Channel Groups.

  • Right-click Channel Groups and select New Channel Group.

  • In the Name field, enter a name for the channel group.

  • The ID field is automatically populated with the next available ID. You can change it if you want.

  • In the Channel Group Function field, select Incoming Trunks, Outgoing Trunks or Incoming/Outgoing Trunks

  • In the Signaling Type field, select the signaling type.

  • Select other fields as required.

See IMG 1010 - Channel Group for a description of each field

Do not select a Route Table in the Route Table field at this point. After you configure Route Tables, (see Creating Routing Tables) you come back to the Channel Group pane and associate a Route Table with the channel group.

 

  • No labels