Routing inbound calls (ss7->sip) based on the E1/T1 port
Syntax:
<condition field="${freetdm_span_number}" expression="X" break="never">
<action application="bridge" data="sofia/internal/${destnumber}@<ip address>:<port>"/>
<action application="hangup" data="${originate_disposition}"/>
</condition>
|
Detailed description:
In the above dialplan replace ‘X’ with the E1/T1 port you want to target.
Also replace <ip address>:<port> with IP address and port of the sip end point you want to send the traffic to
Below is an example of traffic from port 2 that routes to softswitch 1.2.3.4:5060 and port 3 that routes to softswitch 5.6.7.8:5060:
<condition field="${freetdm_span_number}" expression="2" break="never">
<action application="bridge" data="sofia/internal/${destnumber}@1.2.3.4:5060"/>
<action application="hangup" data="${originate_disposition}"/>
</condition>
|
<condition field="${freetdm_span_number}" expression="3" break="never">
<action application="bridge" data="sofia/internal/${destnumber}@5.6.7.8:5060"/>
<action application="hangup" data="${originate_disposition}"/>
</condition>
|
Where to place these condition statements
The above dialplan examples must be placed within the <context name="from-pstn-to-sip">> and above the ‘bridge’ line (which is line that routes the call)
 |