Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

IMG 1010 - RADIUS - Login-IP-Host

Radius Attribute: Login-IP-Host

As per RFC 2865:

This Attribute indicates the system with which to connect the user, when the Login-Service Attribute is included.  It MAY be used in Access-Accept packets.  It MAY be used in an Access-Request packet as a hint to the server that the NAS would prefer to use that host, but the server is not required to honor the hint.

A summary of the Login-IP-Host Attribute format is shown below.  The fields are transmitted from left to right.

Type (IETF Attribute Number) - 14 for Login-IP-Host.

Length - 6

Address - The Address field is four octets. The value 0xFFFFFFFF indicates that the NAS SHOULD allow the user to select an address. The value 0 indicates that the NAS SHOULD select a host to connect the user to. Other values indicate the address the NAS SHOULD connect the user to.

 

  • No labels

Return to Documentation Home I Return to Sangoma Support