Release 2.3 SP1 - An Overview of Features
FR16277 Support for Mode-Set in AMR Codecs
Brief Description:
This feature adds the ability to enable mode-set in AMR and AMR-WB codecs. IMG 2020 will negotiate the mode-set during SDP negotiation. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR16397 Offline Configurator Modifications
Brief Description:
This feature adds modifications to the Offline Configurator, an application that provides a way to modify certain properties of an IMG 2020 configuration file. A user can modify certain objects within the IMG 2020 database or move a configuration created on an IMG 2020 to another IMG 2020. The feature may also be used to convert a single user (Direct Connect) configuration file for use with the Multi-Node EMS. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19408 Redundant EMS Server
Brief Description:
This feature adds support for redundant Multi-Node EMS. The EMS introduces a new EMS redundancy process that is responsible in determining if an EMS system is in active or standby mode. This increases the reliability of the IMG 2020 network by giving the system a backup or fail-safe EMS in the event the primary EMS fails. Refer to the links in the Related Topics section below for more information.
This feature is available under "Controlled Introduction". Please consult with Dialogic Technical Support regarding the installation and operation of this feature.
Related Topics:
FR19432 SIP REFER to ISDN FACILITY Conversion
Brief Description:
This feature adds the ability to convert SIP REFER request directly into ISDN FACILITY message using the ATT Toll Free Transfer Connect Service (ATT TR50075). Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19495 Mapping ISDN/ISUP Redirecting Reason 0110
Brief Description:
This feature adds mapping of a redirecting parameter contained in SS7 IAM (reason 0110) into the SIP Diversion Header (reason "mobile subscriber not reachable"). Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19501 System Monitoring Improvement through Web GUI
Brief Description:
This feature improves the refresh of channel states in Web GUI on Red Hat Enterprise Linux 6.7 (Apache 2.4 is required) and CentOS 7.3. Web GUI receives status update notifications asynchronously over web socket connection, ensuring faster object creation and better user interface responsiveness. Refer to the links in the Related Topics section below for more information.
This feature is available under "Controlled Introduction" and for EMS type of configuration only. The Direct Connect mode is not supported. Please consult with Dialogic Technical Support regarding the installation and operation of this feature.
Related Topics:
EMS Server - Installation and Setup
FR19533 Configurable Password Rules in Web GUI
Brief Description:
This feature add the ability to configure password rules, including password expiration time, password length, non-alphanumeric toggle, uppercase toggle, lowercase toggle, and numeric toggle. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19541 Overriding Remote Gateway DTMF Settings
Brief Description:
This feature adds the ability to override the remote gateway DTMF settings and force the IMG 2020 to abide by the Digit Relay setting in the SIP Profile. If the Digit Relay setting is set to "DTMF Packetized", then the IMG 2020 will use packetized DTMF in its SDP answer as well as transmit DTMF as RFC 2833 packets regardless of what the remote side requests in it SDP offer. If the Digit Relay setting is set to "DTMF In-band", the IMG 2020 will use this even if the remote side request packetized DTMF. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19577 Provide 200ms Delay between SIP Responses in VoLTE Network
Brief Description:
This feature adds the ability to introduce a delay to prevent a race condition between the 200 (OK) for the INVITE and the 200 (OK) for the PRACK/UPDATE. This delay may be needed to communicate effectively with some Voice over LTE (VoLTE) implementations. Refer to the links in the Related Topics section below for more information.
Related Topics:
SIP Profile - Advanced Settings
FR19578 Configurable SIP Congestion Response Codes
Brief Description:
This feature adds the ability to select the SIP response message when IP Traffic Management rejects the call. The options are "503 Service Unavailable", "500 Internal Error", and "403 Forbidden". Refer to the links in the Related Topics section below for more information.
Related Topics:
SIP Profile - Advanced Settings
FR19592 Multiple Registration Support
Brief Description:
This feature adds the capability to define multiple address of records (AOR) that will be registered to a core network. The registration can be via standard or bulk registration. The bulk registration is a mechanism per RFC 6140 that allows the IMG 2020 to register, on behalf of a PBX and the number ranges it serves, to an IMS core network. Refer to the links in the Related Topics section below for more information.
Related Topics:
SIP Signaling - Network Element
FR19595/FR19596 Support for EMS Software on CentOS 7.3 (64-bit)
Brief Description:
This feature adds support for EMS software on CentOS 7.3 operating system (64-bit). Refer to the links in the Related Topics section below for more information.
Related Topics:
EMS Server - Installation and Setup
FR19597 SIP Reattempt to Next DNS Entry upon SIP Response Code
Brief Description:
This feature adds ability to reattempt a SIP dialogue depending upon the response code when using DNS to receive a list of routing options. When using DNS and receiving a list of endpoints to send the call to IMG 2020, there are configurable options that would allow a reattempt when receiving various SIP responses. Refer to the links in the Related Topics section below for more information.
Related Topics:
SIP Profile - Reattempt Invite On Error
FR19624 Translation Type and Global Title Support for CNAM Query
Brief Description:
This feature adds Translation Type and Global Title support for a CNAM Query. IMG 2020 supports the ability for CNAM queries via TCAP to use Translation Type and Global Title information. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19653 Precondition and P-Early-Media for SIP/ISUP Interworking
Brief Description:
This feature adds support for Precondition and P-Early-Media for SIP/ISUP Interworking per 3GPP specification 29.163. Refer to the links in the Related Topics section below for more information.
Related Topics:
SIP Precondition and SS7 Continuity Check Protocol Interworking
SIP P-Early-Media and SS7 UID Parameters Interworking
FR19654 Route Incoming Call by IP Address and Port
Brief Description:
This feature adds the capability to route an incoming call by IP address and port. Refer to the links in the Related Topics section below for more information.
Related Topics:
FR19706 Transferring Fault Files to SD Card when FTP is Unavailable
Brief Description:
This feature adds support for transferring fault files to SD card when FTP is unavailable. Refer to the links in the Related Topics section below for more information.
Related Topics:
Software Install - FTP/SD Card
FR19707 Web GUI/EMS Enhancements
RAW API Modifications
Brief Description:
This feature adds modifications to support sending RAW API for a specific node. Refer to the links in the Related Topics section below for more information.
Related Topics:
Number of Modifications since Last Save on Web GUI
Brief Description:
This feature introduces a status bar at the bottom of the Web GUI that shows the number of modifications made to the configuration since the last save and show a message to save the configuration. Refer to the links in the Related Topics section below for more information.
Related Topics:
Sync State of All Nodes Appear on the Toolbar
Brief Description:
This feature provides better feedback for the user on the sync state of each node configuration database without having to click on all of the node objects. This can also be seen as a prevention tool to ensure that the nodes must always be in sync with the EMS. Refer to the links in the Related Topics section below for more information.
Related Topics: