IMG 1010 - Default bootup.cfg

Owned by Kelli Higdon
Last updated: Mar 04, 2024
2 min read

 

 

# INSTRUCTIONS #1. Edit values as required, as described below. # Change IP Address, Subnet Mask, and Gateway IP Address to the actual values for the IMG 1010. # If you change the version of System Software on the FTP Server or the SD card, # make sure you change the System Software Filename value. # Make sure Host Flag is set appropriately for your configuration and Boot method # Calculate boot flag by adding values based on desired system attributes # For a T1 system: add 0 # For an E1 system: add 2 # # To boot from a FTP Server: add 0 # To boot from a SD Card: add 32 # # For LBR codecs (512 ch/mod):add 0 # For LBR codecs + AMR + GSM (480 ch/mod):add 8 # For LBR + ILBC codecs (336 ch/mod): add 16 # For LBR + ILBC + Wireless codecs (336 ch/mod): add 24 # # An example host flag for a T1 system booting from the SD card with LBR + iLBC codecs would = 48 (0+32+16) # Change Server Address to the actual address of the FTP server. # The Server Name is not used at this time. #2. After editing this file: save file, remove SD card, insert SD card in the IMG 1010, power-up the IMG 1010. #____________________________ # IMG bootup configuration file # IP Address yiaddr=192.168.0.101 # Subnet Mask subnet mask=255.255.255.0 # Gateway Address giaddr=192.168.0.1 # System Software Filename file=img1010_ver1053132_id0101.bin # Host Flag host flag=32 # Server Address for File transfer and SNTP operation. siaddr=192.168.0.100 # Server Name (Optional, not currently used) sname=factorydefault

Return to Documentation Home I Return to Sangoma Support