Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

IMG 1010 - Surface Mounting

Mounting Guidelines

When mounting the chassis, follow these guidelines:

  • Do not obstruct air flow to the front or the side vent holes towards the rear of the unit.

  • Allow sufficient room, approximately 76 cm (2.5 ft.), to access the tray.
     

Procedure

  • If desired, self-adhesive feet can be mounted to the bottom of the unit to protect the surface finish (not included).

  • Set the unit on a clean, secure, and level surface.

Next Task

IMG 1010 - Connecting AC Power or IMG 1010 - Connecting DC Power

  • No labels