Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Description:

Use this pane to configure Backward Call Indicator override settings.

Accessing this Pane:

Dialogic IMG EMS -> Routing Configuration -> Channel Groups -> Channel Group (SS7) -> ISUP Group -> BCI Override

Maximum Objects:

1 BCI Override per ISUP Group

Related Topics:

IMG 1010 - FCI Override

ClientView Pane:

 

Field Descriptions:

Backward Call Indicator:

  • Ignore (default)

  • Override

Charge Indicator:

  • no indication

  • no charge

  • charge

Called party status Indicator:

  • no indication

  • subscriber free

  • connect when free

  • excessive delay (ANSI only)

Called party category Indicator:

  • no indication

  • ordinary subscriber

  • payphone 

End to end method indicator:

  • no end-to-end method available

  • pass along method available

  • SCCP method available

  • pass along and SCCP methods available 

Interworking Indicator:

  • no interworking encountered

  • interworking encountered 

IAM segmentation Indicator:

  • no indication

  • additional information has been received and incorporated into call setup

ISUP Indicator:

  • ISUP not used all the way

  • ISUP used all the way 

Holding Indicator:

  • holding not required

  • holding required 

ISDN access indicator:

  • terminating access non-ISDN

  • terminating access ISDN 

Echo control device indicator:

  • incoming half echo control device not included

  • incoming half echo control device included

SCCP Method indicator:

  • no indication

  • connectionless method available

  • connection oriented method available

  • connectionless and connection oriented methods available
     

  • No labels