Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The IMG 1010 supports the following:

Image RemovedImage Added

TELEPHONY INTERFACES:

...

E1

 

The following E1 Protocols are orderable

ITU-T MRF2

 

Baseline

Telmex R2

MFCR2

Contact Sangoma Technical Support

Brazil

MFCR2

Contact Sangoma Technical Support

 

 

For other Variants, Contact Support Sangoma Technical Support

 

VoIP SIGNALING:

See IMG 1010 - Overview of H.323

See IMG 1010 - Overview of SIP

ROUTING:

The IMG 1010 supports up to 66 total Route/Cause Code/Service Routing Tables per EMS. Each table can support up to 5000 entries. The IMG 1010 has a max capacity of 100,000 entries, or 20 tables each with 5000 entries. For more information on Routing, see IMG 1010 - Overview of Routing.

MEDIA PROCESSING:

  • (2) DSP resource chips embedded on the main board used for generating announcements and tones across IP and TDM.

  • Each DSP resource can handle 128 Treatments. Max amount of Simultaneous treatments is 256.

  • The IMG 1010 can support up to 4096 discrete messages on board at any time. The total size of these messages must not exceed 32 Mbytes

    • G.711 = 64,000 bits/sec. which equates to around 1.1 hours of on board recordig

    • ADPCM = 32,000 bits/sec. which equates to a little over 2.2 hours  

  • The treatments are mapped in the release cause code table.
     

...

  • RFC 3666 Call Flows - SIP to PSTN Dialing

  • SS7 ISUP to ISDN

  • ISDN to SIP UUI Support

  • SIP to SS7 ISUP  (Calling Party Category)

  • SPIROU support in SIP INFO

  • ANSI ISUP: Originating Line INFO support

  • SS7 Carrier Identification Code in the SIP INVITE

  • SIP to SS7 ISUP Cause Code Mapping

  • H.323 to SS7 Cause Code Mapping

  • Digit mapping in CAS
    For more information see IMG 1010 - Interworking Features

CUSTOM VARIANTS:

Sangoma can rapidly customize IP and TDM variants for you using our patented Programmable Protocol Language tool.

...

...