...
The procedure below explains how to configure the IMG for feature F-1666. Verify the following entities are configured before proceeding:
Configure these initial objects before proceeding to the procedure below.
...
Right Click on the Profiles object and select New SGP. In the SGP object Enter a Name to identify this object, change the ID to something other than ID:0. Enable the Outbound Delayed Media by selecting ‘Enabled’ from drop down menu. See screen capture below:
See IMG 1010 - SIP Profile - 10.5.3 for more information on configuring the SGP pane.Right Click on IMG Name and select New Signaling. The Signaling Object is created to allow multiple signaling objects below it. No configuration needs to be accomplished in this object. See IMG 1010 - Signaling Object for information on this object
Right Click on Signaling Object just created and select New SIP. Select the SIP Gateway Profile just created from drop down menu in the Remote IMG’s SIP Profile. See screen capture below:
See IMG 1010 - Configuring SIP Signaling for more information on this object
...
Right Click on Dialogic IMG EMS and select New Routing Configuration. See IMG 1010 - Routing Configuration Object for more information.
Right Click on Routing Configuration and select New Channel Groups. No configuration is needed within the IMG 1010 - Channel Groups object. This object is configured so that multiple Channel Group objects can be configured below it.
Right Click on Channel Groups object and select New Channel Group. Enter a name to identify this channel group and change the ‘Signaling Type’ to SIP using the drop down menu. See IMG 1010 - Channel Group for more information on configuring a SIP channel group.
...
Right Click on Dialogic IMG EMS and select New External Network Elements. The External Network Elements object is created to allow multiple external network element objects to be created under it. There is no configuration required in this object. See External Network Elements for more information.
Right Click on External Network Elements object and select New External Gateways. The External Gateways object is created to be able to configure multiple gateways objects to be created under it. There is no configuration required in this object. See IMG 1010 - External Gateways for more information.
Right Click on External Gateways object and select New External Gateway. Enter a name in the ‘Name’ field to identify this gateway. Select SIP from drop down menu in the Gateway Signaling Type field. See IMG 1010 - External Gateway for more information.
Enter a Name into the Name field.
Select SIP from drop down menu in the ‘Gateway Signaling Protocol’ field.
Enter IP address for this gateway
Select the SIP Gateway Profile (SGP) created earlier from drop down menu in the ‘SIP Profile’ field.
...
Right Click on SIP Channel group and select New IP Network Element. Select the Gateway created under the External Network Elements that was just created. See screen capture below:
At this point the feature has been configured. Below is screen capture of the Delayed Media Tree within ClientView.
