...
To be able to query the status of each of the spans, they must first get created. See the following topics which will explain how to create bearer and signaling spans.
IMG 1010 - Configuring T1 or E1 Bearer Profile - 10.5.x
IMG 1010 - Configuring T1 or E1 Bearer Spans - 10.5.x
IMG 1010 - Configuring T1 or E1 Signaling Spans - 10.5.x
Procedure:
Once the T1 or E1 span is created then they can be queried. Select each individual span as shown below and select Query Span Status. Select the Bearer or Signaling Span object in ClientView.
Select the 'Object Table' tab. This will display each of the spans along with some status information.
Select one of the spans and right click on it. Select Query Span Status. If you would like to query multiple spans, select each span while holding down the <Ctrl> key.
A box like the following will appear with span status information.
| Info |
|---|
The Span Status feature is an indication of errors that have occurred in a snapshot of time. Once the information is displayed (For Ex: Span Status screen opened), the error counters are cleared and set back to zero. The number of errors printed in the span status screen may not reflect the actual number of errors that have occurred in a given amount of time. Other span related system events occurring between Update Status requests may clear the span data. To acquire an accurate indication of Frame Errors, Slips, and Loss of Frame Counts, the span status screen must not be active during a test interval. For example, to get an accurate number of slips etc within a time frame, do the following
|
...